نتایج جستجو برای: plasma arc cutting
تعداد نتایج: 428186 فیلتر نتایج به سال:
The conventional wisdom about solar array arcing in LEO is that only the parts of the solar array that are swept over by the arc-generated plasma front are discharged in the initial arc. This limits the amount of energy that can be discharged. Recent work done at the NASA Glenn Research Center has shown that this idea is mistaken. In fact, the capacitance of the entire solar array may be discha...
An optical method was used to determine the axial velocity of plasma jets produced by a DC plasma spray torch. Different experimental conditions were tested in order to systematically study the influence of the working parameters on the plasma velocity. In this way, the arc current ranged between 200 and 600 A, the gas flow rate between 30 and 80 slm, and the internal nozzle diameter between 6 ...
[1] We present state‐of‐the‐art multiple instrument observations of an isolated substorm on October 12, 2007. The auroral breakup was observed simultaneously by Reimei, THEMIS ASI, and PFISR. The footprint of Geotail was also near the breakup. These observations allow for detailed study of the breakup location in terms of large‐ and small‐scale auroral morphology, particle precipitation, and io...
Homocysteine (Hcy) is a potential risk factor for age-related cataract (ARC). Methylenetetrahydrofolate reductase (MTHFR) is the key enzyme for Hcy metabolism, and variants of MTHFR may affect MTHFR enzyme activity. This study mainly evaluated the associations between variants in MTHFR gene, plasma MTHFR enzyme activity, total Hcy (tHcy) levels and ARC risk in Chinese population. Four single nu...
فرآیند جوش پلاسما در سال 1964 به صنعت جوش معرفی شد. دارای کنترل بهتر قوس در جریانهای پایینتر میباشد. امروزه پلاسما به دلیل دارا بودن سطح کنترل پیشرفته و دقت بالا، در تولید جوشهای مینیاتوری و کاربردهای ظریف به کار رفته و با دارا بودن طول عمر الکترود بالا در تولیدات انبوه به کار میرود. پلاسما گازی است که که تا دمای بسیار بالا گرم میشود آنچنان که رسانای الکتریکی میگردد. شبیه به tig، فرآیند جوش ...
Wire-arc additive manufacturing (WAAM) is a promising method to produce many functional components in different industries. In this method, the welding wires from feedstock are melted by arc discharge and deposited layer layer. Other having chemical compositions can also be added top of previously replacing feed wire stock bimetallic components. This study investigated feasibility using robotic...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید