In this study a real-time open loop estimate of the disturbance displacement input to the tire and an external disturbance force, representing handling and aerodynamic forces, acting on the sprung mass of a quarter-car suspension test rig was generated. This information is intended for use in active control methods applied to vehicle suspensions. This estimate is achieved with two acceleration ...

In this study, the performance of shred tire mixed with railway subgrade is evaluated to reduce environmental vibrations caused by trains’ passage. Since incorporating the Shred Tire seeds in soil affects on its shear strength and deformability parameters so, the first stage of the study was allocated to conducting a series of laboratory tests such as the unconfined compression test, and CBR an...

Tire characteristics and behavior are of great importance in vehicle dynamics since the forces transmitted in the tire-road contact are the main contributors to global vehicle performance. Several research groups have focused on the study and modeling of tires. Some of the most important factors that need to be known are tread characteristics and pressure distribution in the tire-ground contact...

This paper discusses the development of a deformable terrain database to be used in a co-simulation environment with a multibody dynamics vehicle model. The implementation of the model includes a general tire-terrain traction model which is modular to allow for any type of tire model that supports the Standard Tire Interface[1] to operate on the terrain. Rather than utilizing empirical terramec...

This paper describes the design and first experimental results of a novel test setup to measure the impact response of a rotating tire. The test setup is based on a tire on tire principle, which requires less space than a classic drum (rigid rotating cylinder). The setup is used to analyse mechanisms of tire/road noise during road impact excitations, such as a cobbled roads, joints of a concret...

Plus-sizing in the tire industry is the growing practice of replacing a vehicle’s original equipment wheel size with a larger diameter wheel and replacing the tire with a lower aspect ratio tire of the same diameter. This practice is normally associated with aftermarket sales, and there is a growing trend for vehicle dealerships to fit these larger wheels/tires to new cars. This paper discusses...

The objective of this study was to compare the rolling resistance of four common manual wheelchair tires (two pneumatic and two airless solid) and the solid tires used on a commercially available force- and moment-sensing wheel. Coast-down tests were performed with a wheelchair positioned on a two-drum dynamometer. Within each of three load conditions, tire type had a significant effect on roll...

UNLABELLED Streptococcus pneumoniae is an important commensal and pathogen responsible for almost a million deaths annually in children under five. The formation of biofilms by S. pneumoniae is important in nasopharyngeal colonization, pneumonia, and otitis media. Pneumolysin (Ply) is a toxin that contributes significantly to the virulence of S. pneumoniae and is an important candidate as a ser...

─ In a tire pressure monitoring system in which a pressure censor and a transmit antenna are contained in a tire, electromagnetic simulations of radiations from carcass embedded tires are requested. However, it is difficult to accurately determine these shielding effects. In this study, methods for performing accurate electromagnetic simulation by adopting the MoM scheme are determined. In the ...