An existing coupon compression fixture was modified for testing cylindrical coupon samples of pultruded material in compression. Then a new fixture was developed for testing full-size structural shapes, which presents all the advantages of the coupon fixture. Particularly, splitting of the end of the sample is prevented while reducing the stress concentration factor at the ends, yielding compre...

pits, quarries, and on construction sites. The prediction of the penetration rate of drilling machines is very important for cost estimation and planning of rock excavation projects. Many researchers have investigated percussive drilling theoretically or experimentally and correlated the penetration rate with various rock properties. Protodyakonov (1962) developed drop tests and described the c...

The demand for sustainable alternative construction materials to cement in modern technology cannot be underemphasized. This paper presents a non-fired green brick with an agriculture residue namely, rice husk. Although, high plasticity brown clay deposits are widely distributed in Malaysia and rice husk is a well known agriculture residue, research works on non-fired green brick with rice husk...

statement of problem: in order to increase the performance of glass ionomer cement, it is reinforced with metal powders, short fibers, bioceramics and other materials. fluoroapatite (ca10 (po4 )6 f2 ) is found in dental enamel and is usually used in dental materials due to its good chemical and physical properties. objectives: in this study, the effects of the addition of synthesized fluoroapat...

The correlation between the strength at the macroscale and the elastic deformation as well as shear cracking behavior at the microscale of bulk metallic glasses (BMGs) is investigated. The temperatures of 298 K and 77 K as well as the strain rate ranging from 10(-6) s(-1) to 10(-2) s(-1) are applied to the BMGs, in which the mechanical responses of the BMGs are profiled through the compression ...

One of the major challenges of our present society is the protection of environment; with respect to this some of the important elements are reduction of natural raw materials and consumption of waste materials. The recycled aggregate sample of size 20mm which is the maximum size of aggregate in reinforced cement concrete is collected from demolished structures in our surrounding areas and the ...

:the aim of this work is to investigate the influence of sodium oxide on properties of fresh and hardened paste of alkali-activated blast furnace slag from isfahan steel plant. the silica modulus (sio2/na2o) of activator was adjusted at 0.6 and a number of mixes were designed in such a way to contain different levels of sodium oxide including 1, 2, 3, 4, 5, and 6% by weight of dry slag. the mos...

This paper describes an examination of the development of tension lap splices in high-strength concrete and the applicability of the restriction in the ACI 318 code where the values of √fc′ used to calculate development length shall not exceed 100 psi. The focus is on the development of splices with Grade 60 epoxy-coated and uncoated bars in normalweight concrete. A summary of the behavior of b...

An investigation was conducted to determine the influence of recycled scrap tire rubber on the engineering properties of controlled low strength material (CLSM). With control over the ultimate compressive strength of CLSMs being key for applications such as backfilling utility trenches where re-excavation is often necessary, incorporation of scrap tire rubber into the CLSM mixture is a viable w...

Electrical resistivity measurement of freshly prepared uncured and cured soil-cement materials is done and the correlations between the factors controlling the performance of soil-cement and electrical resistivity are discussed in this paper. Conventional quality control of soil-cement quite often involves wastage of a lot of material, if it does not meet the strength criteria. In this study, i...