The compatibility between a composite beam cross-sectional analysis based on the variational asymptotic approach, and a helicopter rotor blade model which is part of a comprehensive rotorcraft analysis code is examined. It was found that the finite element cross-sectional analysis code VABS can be combined with a moderate deflection rotor blade model in spite of the differences between the form...

This paper present a new advanced control algorithm based on continuous minimization of predicted tracking errors, to achieve torque, rotor speed and rotor flux amplitude tracking objectives. This algorithm called a new Adaptive Nonlinear Predictive Control to induction motor drive uses a combination of the adaptive observer for rotor flux and Cascaded Nonlinear Predictive Control technique. Th...

This paper proposes an adaptive flux observer for induction motors, where stator and rotor resistances are estimated in online environments. The variation of motor parameters during operation degrades the performance of the controller and the flux observer. Among the parameters of induction motors, rotor resistance is a crucial one for flux estimation, and stator resistance also becomes critica...

This report contains the results of a full-scale experimental feasibility study of rotor isolation employing the Dynamic Antiresonant Vibration Isolator (DAVI) . The full-scale experiments were performed on a UH-2 helicopter fuselage isolated from a simulated rotor and transmission. Tests were conducted for three directions of vibratory input at the hub on the nonisolated vehicle and then compa...

Time-dependent rheological properties and thixotropy of reconstituted debris-flows samples taken from channel bank deposits are examined using a commercial rheometer equipped with vane rotor geometric system. Sweep tests creep were carried out involving mixtures having different grain concentrations ranging between 50% 58%. Different initial conditions the considered in order to analyze effects...

Hardwood sawmills traditionally saw logs in a manner that either orients sawlines parallel to the log central axis (straight sawing) or the log surface (allowing for taper). Sweep is characterized as uniform curvature along the entire length of a log. For logs with sweep, lumber yield losses from straight and taper sawing increase with increasing levels of sweep. Curve sawing logs with sweep wi...

An automatic rotor trim control system was developed and successfully used during a wind tunnel test of a full-scale UH-60 rotor system with Individual Blade Control (IBC) actuators. The trim control system allowed rotor trim to be set more quickly, precisely and repeatably than in previous wind tunnel tests. This control system also allowed the rotor trim state to be maintained during transien...

Synchronous generators are of two type’s salient pole type and round rotor type. The load angle curve of a cylindrical rotor synchronous machine comprises a single sine term only while in salient pole synchronous generators, power-angle characteristic has two terms. The first term is the fundamental component due to field excitation (the same as the cylindrical rotor) and the second term ...

LIST OF SYMBOLS L s stator inductance(Primary inductance) L r rotor inductance (Secondary inductance) M mutual inductance Rs stator resistance Rr rotor resistance Rc cable resistance P pole number Vds,Vqs d-axis and q-axis components of the stator voltage vector Vs Vdr,Vqr d-axis and q-axis components of the rotor voltage vector Vr ids, iqs d-axis and q-axis components of the stator current vec...