To investigate seismic performance of beam-column knee joints, four full-scale reinforced concrete beam-column knee joints, which were fabricated to simulate those in as-built RC frame buildings designed to ACI 318-14 and ACI-ASCE 352R-02, were tested under reversed cyclic loading. In the experimental programme, particular emphasis was given to the effect of horizontal reinforcement (in format ...

Although the benefits of using timber in midand high-rise construction are undisputed, there are perceived shortcomings with respect to the ductility needed to provide seismic resistance and a corresponding lack of appropriate design guidance. Overcoming these perceived shortcomings will allow timber, and its wood product derivatives, to further expand into the multi-storey construction sector,...

Precast prestreesed concrete braces are a new method for seismic strength of Concrete Structures which has the following benefits: a) no wet concrete work in construction site b) No bolt or anchorage to the existing frame c) easy to apply d) short construction period e) low construction cost, to evaluate seismic performance of strengthened structure a model consist of existing frame and concret...

Displacement-based methods are recognized as appropriate approaches to reach the goals of performance-based seismic design method. In the direct displacement-based seismic design method, the seismic yield displacement is applied as one of the important design parameters. In this paper, a new relation is suggested to determine the lateral displacement pattern at first yielding of eccentrically b...

Irregular buildings make up a large portion of  urban infrastructure. Presence of irregularities can be due to architectural and  user changes in building stories. Main objective of this article is evaluate seismic performance of structures with vertical irregularities. Seismic responses are obtained by enveloping peak inelastic responses resulting from pushover analyses according to provided p...

Probabilistic characteristics of seismic responses of the Partially Restrained connection rotation (PRCR) and panel zone deformation (PZD) installed in older steel moment frames were investigated in accordance with statistical inference in decision-making process. The 4, 6 and 8 story older steel moment frames with clip angle and T-stub connections were designed and analyzed using 2%/50yrs grou...

According to modern seismic codes, in concentrically braced frames the seismic input energy should be dissipated by means of the hysteretic behaviour of braces while all the other members (i.e. beams and columns) have to remain elastic. Accordingly, the design internal forces of braces are determined in these codes by elastic analysis of the structure subjected to seismic forces obtained by the...

In assessments of the seismic adequacy of existing steel bridges, the anchorage of steel truss piers to their foundations often has insufficient strength to resist seismic demands. Many other non-ductile failure locations may also exist along the seismic load path that cannot provide adequate seismic performance. Although strengthening is an option, this approach may only transfer damage to ano...

hysteretic dampers as the most practical passive control methods have improved the seismic performance of steel structures through energy dissipation induced by large inelastic deformations. among them in this paper, kbf (knee braced frames), a special form of braced frames having a diagonal brace connected to a knee element instead of beam-column joint, is investigated. in such systems, the kn...