A pre-consolidated thermoplastic advanced composite cross-ply sheet comprised of two uniaxial plies orientated at 0/90 has been thermoformed using tooling based on the double-dome bench-mark geometry. Mitigation of wrinkling was achieved using springs to apply tension to the forming sheet rather than using a friction-based blank-holder. The shear angle across the surface of the formed geometry ...

We report on experimentally observed shear stress fluctuations in both granular solid and fluid states, showing that they are non-Gaussian at low shear rates, reflecting the predominance of correlated structures (force chains) in the solidlike phase, which also exhibit finite rigidity to shear. Peaks in the rigidity and the stress distribution's skewness indicate that a change to the force-bear...

Passive control methods can be utilized to build earthquake resistant structures, and also to strengthen the vulnerable ones. In this paper, we studied the effect of this system in increasing the ductility and energy dissipation and also modeled the behavior of this type of eccentric bracing, and compared the hysteresis diagram of the modeled samples with the laboratory samples. We studied seve...

Nanoimprint lithography is an efficient way to reproduce nanostructures down to 20 nanometers in sub-micrometer polymeric films. To optimize this process, simulation using a Newtonian behavior is a cheap and efficient way to predict the polymer flow in micro and nano size cavities. This behavior is nevertheless limited to flows with shear rates below a critical value that can be determined with...

Model physically associating solutions of acrylic triblock copolymer molecules in a midblock-selective solvent displayed non-linear strain-stiffening behavior which transitioned to rapid strain softening during shear start-up experiments at reduced rates spanning almost four orders of magnitude. Softening was believed to result from the shear-induced formation of highly localized regions of def...

The aim of this paper is to introduce a new three-dimensional elastoviscoplastic model that combines both the Oldroyd viscoelastic model and the Herschel-Bulkley viscoplastic model with a power-law index n > 0. The present model is derived to satisfy the second law of thermodynamics. Various fluids of practical interest, such as liquid foams, droplet emulsions or blood, present such elastovisco...

The rheological behavior of feedstocks used in powder injection molding technology influences strongly on the final properties of the products. Powder loading is one of the important factors that have a great distribution on rheological behaviors. By using the gas atomized spherical 316L stainless steel powder and the binder of 55% paraffin wax+ 40% polyethylen+ 5% stearic acid, four kinds of f...

The purposes of this study were to produce polysaccharides from red pepper stems using different extraction methods and evaluate their chemical composition, in vitro biological capacities, and rheological properties. Two polysaccharides were extracted from red pepper stems using an autoclave and alkali treatments, and the extracts were named PAU and PAL, respectively. The contents of total phen...

Empirical estimates of the fundamental frequency of tall buildings vary inversely with their height, a dependency not exhibited by the various familiar models of beam behavior. This paper examines and explains this apparent discrepancy by analyzing the consequences of using two models to estimate such natural frequencies: A two-beam model that couples the bending of a classical cantilever to th...

In this study, effects of multi walled carbon nanotubes and temperature on rheological behavior of engine oil (10W40) have been examined. For this purpose, the experiments were carried out in the temperature range of 5-55°C for several suspensions with solid volume fractions of 0.025%, 0.05%, 0.1%, 0.25%, 0.5% and 0.75%. The viscosity of all samples was measured in the shear rate range of 666s-...