This paper describes a new approach which can be used to interpret the experimental creep deformation data obtained from miniaturized thin plate bending specimen test to the corresponding uniaxial data based on an inversed application of the reference stress method. The geometry of the thin plate is fully defined by the span of the support, l, the width, b, and the thickness, d. Firstly, analyt...

Slip instability and tensor instability are two kinds of failure modes of cemented waste rock backfills. In order to simulate the creep characteristics of cemented waste rock backfills, PFC was carried out. The results show that: rocks inside the models will have displacement under load. The expansion is caused by large lateral displacement of the rocks. A non-stationary creep model of cemented...

This paper presents a mixed finite element model for the nonlinear time-dependant analysis of composite beams with partial shear connection. The key idea is to consider, as a first approach, a viscoelastic/plastic model for the concrete slab in order to simulate the interaction between the time effects of concrete, such as creep and shrinkage, and the concrete cracking. Creep is taken into acco...

Our collaboration has resulted in a series of three papers on a new model for grain boundarydiffusion creep in partially molten rocks. The broad aim is to better understand the physical processes controlling the interactions of deformation, melt distribution and melt migration. Towards this aim, we saw the need for a 3-D, grain-scale model for viscosity in the presence of melt. The constitutive...

In the process of heavy oil thermal recovery, the creep of strata can often be accelerated due to injection pressure, the temperature of steam, the structural characteristics of rock itself and other factors. However, the effect of creep in strata may cause various types of damage in underground mining, such as fracture or deformation of oil casings, and so on. The mechanism of fluid–structure ...

A new experimental method which allows the direct separation of the components of drying creep due to micro cracking and stress-induced shrinkage is developed, demonstrated and validated. The hasic idea is to compare the curL'CIture creep of heams suhjected to the same hending moment hut rery different axial forces. The results confirm that drying creep has two different sources: microcracking ...

Creep lifetime of turbine blade material subjected to sustained centrifugal forces at elevated temperatures is limited by accumulated inelastic deformation and creep crack growth (CCG). Creep resistance exhibited in conventionally cast polycrystalline (PC) Ni-base superalloy components has been enhanced via solidification techniques. Directional solidification (DS) results in large grain sizes ...

To study the influence of earthquakes and engineering disturbances on deformation deeply buried rock masses, shear tests were carried out anchored sandstone marble granite masses under creep fatigue loading, a new model was established to characterize characteristics loading. The curves different lithologies clearly show three stages: attenuation, steady-state creep, accelerated creep. Fatigue ...

A steady-state creep law for rocksalt, describing the two parallel mechanisms of dislocation creep and fluid-enhanced grain-boundary diffusion creep, has been used in numerical models of salt diapirism, to study the effective viscosity of rocksalt. Typical models included a 3-km-thick sedimentary layer on top of 1 km of rocksalt. The grain size of the salt has been varied between 0.5 and 3 cm a...

Fractional order theory was used to characterize the accelerated creep phase of a nonlinear model. To accurately describe each stage anthracite model, “gyroscope” unit introduced by combining Heaviside function and damage definition. The effect on determined designing completing three-axis graded-separation loading tests anthracite. test curves were combined classify into five stages: transient...