The load partitioning between surface and bulk was studied by means of in-situ synchrotron energy dispersive diffraction in an SAF 2507 superduplex stainless steel having a strain hardened surface layer with compressive residual stresses. Two loading cycles with a peak tensile strain of 0.5% and 0.87%, respectively, were successively applied and the evolution of stresses in the respective const...

Following rupture, tendons are sutured to reapproximate the severed ends and permit healing. Several repair techniques are employed clinically, with recent focus towards high-strength sutures, permitting early active mobilisation thus improving resultant joint mobility. However, the arrangement of suture repairs locally alters the loading environment experienced by the tendon. The extent of the...

Structural steel sections are mainly used in beams and columns of building frames. Iran National Steel IndustrialGroup is among the oldest and largest producers of beams in Iran. It has two beam production lines, namely Line630 and Line 650. In this study, the mechanical properties of manufactured beams in these production lines werecompared. Based on the t-test results, the e...

The tensile creep and creep-recovery behaviour of a unidirectional SiC fibre-Si3N4 matrix composite was analysed using finite element techniques. The analysis, based on the elastic and creep properties of each constituent, considered the influence of fibre-matrix bonding and processing-related residual stresses on creep and creep-recovery behaviour. Both twoand threedimensional finite element m...

Changes in axial stress and refractive index have been measured as a function of the total UV-irradiation fluence during the formation of Bragg gratings in B/Geand Sn/Ge-codoped core fibers. For the B/Ge-codoped core fiber, a fast development of the type-I grating with a significant increase in refractive index and tensile stress in the fiber core is followed by a slow growth of the type-IIA gr...

This article presents a study of fatigue-crack propagation behavior in Nitinol, a 50Ni-50Ti (at. pct) superelastic/shape-memory alloy, with particular emphasis on the effect of the stress-induced martensitic transformation on crack-growth resistance. Specifically, fatigue-crack growth was characterized in stable austenite (at 120 8C), superelastic austenite (at 37 8C), and martensite (at 265 8C...

BACKGROUND The aim of this study was to compare and analyze the tensile mechanical properties of the ascending aorta (AA) in Wistar Kyoto (WKY) rats and spontaneously hypertensive rats (SHRs), for the purpose of providing a biomechanical basis for hypertension prevention. METHODS Pulse wave velocities (PWV) and serum nitric oxide (NO) concentrations were determined in 6-month-old WKY rats and...

The effect of polymeric coatings on the static fatigue of double-coated optical fibers is investigated. A closed form solution of the tensile stress in the glass fiber under the action of a constant tensile force in the fiber’s axial direction is obtained using viscoelastic theory. The tensile force is applied to the glass fiber and polymeric coatings. The applied tensile fore is gradually tran...

The effects of hydrostatic extrusion on particle cracking and on the subsequent tensile properties of some prototypical particlereinforced metal–matrix composites are investigated. In most cases, tensile failure occurs through a plastic instability in accordance with the Considere criterion for necking. The corresponding failure strain is therefore dictated by the global flow and hardening char...

[1] Plastic sea ice rheologies that employ teardrop and parabolic lens yield curves and allow varying biaxial tensile stresses have been developed. These rheologies, together with the previously developed ellipse and Mohr-Coulomb-ellipse rheologies, are implemented in a thickness and enthalpy distribution sea ice model to examine the rheological effect in numerical investigations of arctic clim...