This paper investigated the effect of residual thermal stresses on carbon fibre pullout by using cohesive zone modelling. The finite element method was applied to analyse the residual thermal stress components along the interface between the fibre and matrix due to curing. A comparison study on the anisotropic and isotropic material properties are considered using four typical carbon fibres, T3...

Thin coatings on metallic substrates are extensively used in mechanical, aerospace, microelectronic, optical, and medical applications. Coatings affect the surface properties of the system, while bulk properties and strength primarily depend on the substrate. In coated components subjected to thermal cycling, differences in physical properties and chemical nature between constituent parts of co...

This report presents UCB progress in developing a comprehensive thermal and fluid dynamics model for the NGNP intermediate heat exchanger (IHX) and other compact heat exchangers. For nuclear hydrogen applications, an IHX is required to transfer heat from high temperature and high-pressure primary helium coolant to a hydrogen production process. An intermediate heat transfer loop is used for the...

For powder-bed electron beam additive manufacturing (EBAM), support structures are required when fabricating an overhang to prevent defects such as curling, which is due to the complex thermomechanical process in EBAM. In this study, finite element modeling is developed to simulate the thermomechanical process in EBAM in building overhang part. Thermomechanical characteristics such as thermal g...

An optically thin MEMS beam suspended above a substrate and illuminated with a CW laser forms an interferometer, coupling out-of-plane deflection of the beam to absorption within it. In turn, laser absorption creates thermal stresses which drive further deflection. This coupling of motion to thermal stresses can cause limit cycle oscillations in which the beam vibrates in the absence of periodi...

In this paper, analysis for the propagation of general anisotropic media of finite thickness with two thermal relaxation times is studied. Expression of displacements, temperature, thermal stresses, and thermal gradient for most general anisotropic thermoelastic plates of finite thickness are obtained in the analysis. The calculation is then carried forward for slightly more specialized case of...

The intention of this study is the analysis of thermal behavior of functionally graded beam (FGB). The distribution of material properties is imitated exponential function. For thermal loading the steady state of heat conduction with exponentially and hyperbolic variations through the thickness of FGB, is considered. With comparing of thermal behavior of both isotropic beam and FGB, it is appea...

The grinding process consists of an abrasive contact between a moving workpiece and a wheel in rotation [1]. Because of the grinding power converted into heat at the interface, high temperatures can appear that can lead to thermal, mechanical or metallurgical consequences. Each of these effects has been fully related in literature by authors. Guo presents a good review of surface layers (dark, ...

OBJECTIVES The occurrence of "chipping" of all-ceramic restorations with Y-TZP frameworks has resulted in various designs and cooling procedures recommended for reducing such behavior. In this paper the temperature gradients during fast and slow cooling for conventional and anatomical designs are compared as well as an optical procedure to directly compare the influence of cooling rate on resid...