The capillary tube/suction line heat exchanger (SLHX) is widely used in small refrigeration systems. The refrigerant flowing in the SLHX experiences frictional and accelerational head losses, flashing, and heat transfer simultaneously. The simulation of refrigerant flow through SLHX is important since this will help engineers analyze and optimize the SLHX incorporated in a refrigeration system....

This study analyzes the characteristics of alumina (Al2O3)/water nanofluid to determine the feasibility of its application in an air-cooled heat exchanger for heat dissipation for PEMFC or electronic chip cooling. The experimental sample was Al2O3/water nanofluid produced by the direct synthesis method at three different concentrations (0.5, 1.0, and 1.5 wt.%). The experiments in this study mea...

BACKGROUND Ground source heat pumps is a building energy conservation technique. The underground buried pipe heat exchanging system of a ground source heat pump (GSHP) is the basis for the normal operation of an entire heat pump system. METHODS Computational-fluid-dynamics (CFD) numerical simulation software, ANSYS-FLUENT17.0 have been performed the calculations under the working conditions o...

Numerical simulation is extensively used in heat exchanger design and performance evaluation. While evaluating potential working fluids, pure fluids and fluid mixtures with different component combinations and fractions are compared based on simulation results. Two of the challenges while conducting such studies are the uncertainties of refrigerant properties and the applicability of empirical ...

This paper presents the application of Differential Evolution (DE) for the optimal design of shell-and-tube heat exchangers. The main objective in any heat exchanger design is the estimation of the minimum heat transfer area required for a given heat duty, as it governs the overall cost of the heat exchanger. Lakhs of configurations are possible with various design variables such as outer diame...

The energy recovery performance of crude pre-heat trains (PHTs) in oil refineries is typically impaired by deposition over time of fouling on the thermal surfaces. Such time varying effects are normally not considered in the design or retrofit of heat exchangers networks. In this paper, the importance of taking into account such effects is demonstrated, bymeans of a case study. An existing indu...

In the current work optimization of double pipe fin-pin heat exchanger has been studied. The effective parameters those are controlling the heat exchanger performance are divided in two categories; geometrical and operating conditions. Using the Brent’s optimization algorithm and handling the thermodynamically design concept, one can minimize entropy generation in different length of heat excha...