Yttria-stabilized tetragonal zirconia polycrystals (Y-TZP) have proved to be important structural ceramics. High strength and fracture toughness make them attractive candidates for a number of demanding applications. It was established that these advantageous properties are strongly influenced by the ceramic microstructure [1]. The relationships between microstructure and mechanical properties ...

OBJECTIVES The aim of this study was to evaluate and compare the translucency of two different all-ceramic systems using Vita Easyshade digital shade matching device in an in vitro model. MATERIALS AND METHODS Translucency of lithium disilicate glass-ceramic (IPS e.max Press) and zirconia all-ceramic system (Ceramill ZI) were evaluated and compared. A total of 5 square-shaped specimens with 0...

AIM Surface treatment is necessarily required for bonding of zirconia to the veneering porcelain and luting cements. Sandblasting is the most common and probably the most efficient surface treatment method. Sandblasting roughens the surface and may affect the flexural strength of zirconia. Different sandblasting protocols may yield variable results. This study sought to assess the effect of san...

Due to their aesthetic value and high compressive strength, dentists have recently employed ceramics for restoration materials. Among the ceramic materials, zirconia provides high toughness and crack resistant characteristics. Residual stresses develop in processing due to factors including grain anisotropy and thermal coefficient mismatch. In the present study, polychromatic X-ray (Laue) micro...

STATEMENT OF PROBLEM The mechanical properties of zirconia suggest that it might serve as a material for abutment crowns for partial removable dental prostheses (RDPs). Only limited clinical evidence is available for the use of ceramics as abutment crowns. PURPOSE The purpose of this retrospective clinical study was to evaluate the outcome of veneered zirconia single crowns in abutment teeth ...

Alumina-zirconia nano-composites were recently developed as alternative bearing materials for orthopedics. Previous, preliminary reports show that such alumina-zirconia nanocomposites exhibit high crack resistance and low wear rate. In this paper, additional information is given in terms of wear, crack resistance and ageing behaviour: femoral heads are inspected after 7 million cycles of wear t...

DIFFERENT INDIRECT RESTORATIONS TO REPLACE A SINGLE MISSING TOOTH IN THE POSTERIOR REGION ARE AVAILABLE IN DENTISTRY: traditional full-coverage fixed dental prostheses (FDPs), implant-supported crowns (ISC), and inlay-retained FDPs (IRFDP). Resin bonded FDPs represent a minimally invasive procedure; preexisting fillings can minimize tooth structure removal and give retention to the IRFDP, trans...

Ceramic/metal interfaces occur in a great number of important applications, such as ceramic/metal composites, microelectronics packaging, ceramic/metal seals, and so forth. Understanding the formation and evolution of such interfaces is therefore essential for the better design and optimization of these technologies. In this thesis, a methodology for the study of the thermochemical interactions...

We examined stainless-steel, cobalt-chrome, titanium and alumina and zirconia ceramic femoral heads retrieved at revision surgery. All the heads had articulated against ultra-high-molecular-weight-polyethylene (UHMWPE) acetabular cups. We studied the simulation of third-body damage and the wear of UHMWPE against the various materials used for the heads. The surfaces of the retrieved heads were ...

The present study evaluated the shear bond strength between an indirect composite material and zirconium dioxide (zirconia) ceramics after thermocycling. A total of 80 zirconia (Katana) discs were divided into five groups and primed with one of following agents: All Bond 2 Primer B (ABB), Alloy Primer (ALP), AZ Primer (AZP), Estenia Opaque Primer (EOP), and Porcelain Liner M Liquid A (PLA). An ...