Aerobic, anoxic, and anaerobic selectors have become popular for controlling filamentous bulking in activated sludge systems; however, selectors are not always successful. Regression analyses of data collected from 48 full-scale wastewater treatment plants, with operating selectors, provided a method for ranking the importance of selector operating and design parameters (with respect to their i...

The objective of this study is to optimize the river monitoring network in Taizihe River, Northeast China. The situation of the network and water characteristics were studied in this work. During this study, water samples were collected once a month during January 2009 - December 2010 from seventeen sites. Futhermore, the 16 monitoring indexes were analyzed in the field and laboratory. The pH v...

The upflow microbial fuel cell (UMFC) was developed to generate electricity while simultaneously treating wastewater. During a five-month period of feeding a sucrose solution as the electron donor, the UMFC continuously generated electricity with a maximum power density of 170 mW/m2. To achieve this power density, the artificial electron-mediator hexacyanoferrate was required in the cathode cha...

A Bayesian approach was applied to river water quality modeling (WQM) for load and parameter estimation. A distributed-source model (DSM) was used as the basic model to support load reduction and effective water quality management in the Hun-Taizi River system, northeastern China. Water quality was surveyed at 18 sites weekly from 1995 to 2004; biological oxygen demand (BOD) and ammonia (NH(4)(...

Bogolitsyn K., gusakova m., samsonova n., selivanova n., Pochtovalova a.: Integral indices for quality assessment of pulp and paper mill effluents. Ekológia (Bratislava), vol. 33, no. 1, p. 60–66, 2014. The first part of this investigation studied complex nature of chemical oxygen demand (cod) parameter on local and overall effluents, which were obtained from two pulp and paper mills, located i...

Textile dye wastewaters are characterized by strong colour, salts and other additives, high pH, temperature, chemical oxygen demand (COD) and biodegradable materials. Being aesthetically and environmentally unacceptable, these wastewaters need to be treated before their discharge. Anaerobic bioprocesses have been proposed as being environmentally friendly and relatively cheap; however, when app...

This study evaluated the effectiveness of soils with different textures and thickness to treat BOD, N and P eluted from household septic effluent. The assessments were accomplished by leaching undisturbed soil monoliths of 30, 45 and 60 cm thickness and 25 cm in diameter, representing the four different textural groups and hydraulic loadings recommended by the Kentucky Health Department, with d...

In this study, the electrocoagulation process was evaluated as a pretreatment process for olive mill wastewaters. Aluminium (Al) and iron (Fe) electrodes, several contact times and 0.5, 1 and 2 A currents were used to compare chemical oxygen demand (COD) removal efficiencies for each case. The optimum contact time and current were 45 minutes and 1 A, respectively, which resulted in a COD remova...

In this paper, bioaugmentation was applied to upgrade a full-scale activated sludge system (S2) into a contact oxidation system (S1). Results showed that when chemical oxygen demand (COD) and ammonia nitrogen (NH(4)(+)-N) concentration of the petrochemical wastewater were 320-530 mg/L and 8-25mg/L, respectively, the bioaugmented process (S1) took only 20 days when they were below 80 mg/L and 10...

Four methods for determining substrate recoveries in studies concerned with the partition of substrate between sludge synthesis and respiration were investigated. An energy balance comparing chemical oxygen demand (COD) removed with the summation of oxygen uptake and the COD of the cells produced yielded average recoveries closer to 100% than any of the other three methods tested. The standard ...