In this paper, a fracto-metallographic analysis was performed on the cracked specimens of cold drawn pearlitic steel subjected to fatigue tests. Fatigue cracks are transcollonial and exhibit a preference for fracturing pearlitic lamellae, with non-uniform crack opening displacement values, micro-discontinuities, branchings, bifurcations and frequent local deflections that create microstructural...

Metallurgical design of microalloyed steel used to be a challenge due to its multivariate nature. Over ten kinds of microalloying elements and multi-step processing routes have complex interactions and different contributions to the final mechanical properties. Data-driven model is able to throw a rapid insight into the composition-processing -property correlation of steel metallurgy in a syste...

in this article, the effect of parameters like working gap, work piece rotational speed and material removal mechanism(injection of the sic abrasive slurry and al2o3, use of diamond paste as abrasive tool) in magnetic abrasive finishing process using designing of experiments on the external surface of cylindrical work pieces of stainless steel aisi 440c to get minimum surface roughness has been...

The concept of cold-formed light steel framing construction has been widespread after understanding its structural characteristics with massive research works over the years. Connection serves as one of the important elements for light steel framing in order to achieve its structural stability. Compared to hot-rolled steel sections, cold-formed steel connections perform dissimilarity due to the...

Wire electric discharge machine (WEDM) is spark erosion in unconventional machining technique to cut hard and the conductive material with a wire as an electrode. The blanking die material SKD 11 is a high carbon and high chromium tool steel with high hardness and high wearing resistance property. This tool steel has broad application in press tools and dies making industries. In this research ...

The electric arc furnace (EAF) is used to produce high quality steel from steel scraps. The EAF uses plasma arc to generate heat for melting scarp or direct reduced iron (DRI). The liquid metal should be drained from the tap hole. Manual tapping operation of the EAF in the hot environment around the furnace is a potentially dangerous and time consuming task for the workers. Therefore, it is ess...

Usually, tool steels are used in quenched and tempered conditions. Due to the phase transition from austenite martensite volume change during transformation, controlling distortion might be challenging. A newly developed steel focusing on a bainitic structure, even for bigger dimensions, shows lower hardness at ambient temperature than conventional hot working but with dependency. Therefore, se...

The automotive industry is using more and more of Advanced High Strength Steel in order to reduce the weight of the car. Since this will generate more springback, it is of vital importance to be able to predict the amount of springback in the parts. Otherwise, many late changes have to be made in order to fit the parts in their position. In order to increase the ability to understand and test t...

The quality of steel strip produced in a wide strip rolling mill depends heavily on the careful selection of initial ground work roll profiles for each of the mill stands in the finishing train. In the past, these profiles were determined by human experts, based on their knowledge and experience. In this research, a Self-Organising Migration Algorithm (SOMA), a heuristic optimisation algorithm,...

Severe competition in US steel industry urges quality improvements in hot rolling processes. Surface defects have been a long-standing troubling issue in hot rolling processes due to the ineffectiveness of existing detection methods. This paper presents an advanced statistical analysis method to identify the impacting factors in surface defects of hot rolling processes. The surface defects on t...