In brass instruments the player’s lips are used as a control valve that allows an oscillating flow of air into the instrument. The behaviour of this valve, the lip-reed, is determined by both the pressure difference across the lips and the open area between the lips. Computer simulations of brass instrument playing frequently represent the lips as an oscillating system with one degree of freedo...

Real Applications of Databases ask for the support of Ag-gregation. This, however, needs stronger semantics than usual. In particular , such semantics should extend the wellfounded semantics WFS. We study such extensions and determine which semantics are possible given certain abstract properties like partial evaluation, cumulativity, partial monotony and supraclassicality. While WFS + (introdu...

Machining of medium Brass alloy is very difficult. There are a number of parameters like cutting speed, feed and depth of cut etc. which must be given consideration during the machining of medium Brass alloy. This study investigates the effects of process parameters on Material Removal Rate (MRR) in turning of C34000. The single response optimization problems i.e. optimization of MRR is solved ...

Deformation microstructure and texture in a cold-rolled austenitic steel 310S with low stacking fault energy (SFE) have been investigated by SEM and TEM. When 310S plates were rolled by 95% in thickness reduction, a remarkable development of the brass-type preferred orientation was confirmed by X-ray diffraction. SEM observations of the specimens with such texture exhibited a layered structure ...

We describe a design for the modular horizontal activity disc and tandem cages suitable for continuous monitoring of spontaneous running and of core temperatures in golden hamsters. An acrylic disc is equipped with a short brass axle. It is mounted inside a brass rotation sleeve at a 15 degrees angle off the horizontal plane. The disc module fits firmly inside either half of the tandem cage whe...

Taking into account the use of Nickel brasses in industry a great number of methods for the determination of Ni have been reported. More, theoretical predictions of free Cd increasing with decreasing salinity have been confirmed using cadmium selective electrodes. The method under proposal, for the determination of nickel ions in brass alloys consists of the following steps: Cu masking with sod...

Brass used in heat exchanger is corroded in industrial water. The used inhibitor is extracted from horse tail herb added in different concentrations and temperature to industrial water in which heat exchanger if exposed to these conditions. Brass is studied under the above conditions using potentiodynamic polarization, scanning electron microscopy (SEM) and X-ray diffraction. Potentiodynamic po...

brass ferrules have been used as packing in a laboratory- scale glass distillation column approaching pilot plant size because of their availability in all sizes and low cost. the available size range is such that these ferrules could also be used in industry and the results of this study could be scaled up. the performance of the new packing has been compared with the performance of glass pack...

Laboratory experiments have indicated that hatchling loggerhead sea turtles (Caretta caretta) are able to establish and maintain courses using information from the Earth's magnetic field. In previous experiments, turtles were tested in relatively uniform magnetic fields generated by large coil systems surrounding an orientation arena. In this study, we investigated the orientation behavior of h...

A ship building grade of carbon steel has been coated with copper by a furnace brazing process starting from a brass braze. An argon protective atmosphere was used to prevent oxidation of the steel. However, when the deposit was produced a low gas flow rate ensured that zinc was lost from the brass by oxidation leaving a copper deposit on the steel surface. The copper was found to be zinc free ...