OBJECTIVE The aim of this study was to compare the effects of different enamel conditioning techniques for bracket bonding. METHODS Ninety-one human premolars were randomly divided in six groups of 15 specimens each. The enamel surfaces of the teeth were etched with 35% orthophosphoric acid in Group 1, with a self-etching primer in Group 2, sandblasted in Group 3, sandblasted and etched with ...

Diabetes and infections are associated with a high risk of implant failure. However, the effects of such conditions on the electrochemical stability of titanium materials remain unclear. This study evaluated the corrosion behavior of a Ti-6Al-4V alloy, with a smooth surface or conditioned by double-acid-etching, in simulated body fluid with different concentrations of dextrose and lipopolysacch...

The laser damage precursors in subsurface of fused silica (e.g. photosensitive impurities, scratches and redeposited silica compounds) were mitigated by mineral acid leaching and HF etching with multi-frequency ultrasonic agitation, respectively. The comparison of scratches morphology after static etching and high-frequency ultrasonic agitation etching was devoted in our case. And comparison of...

OBJECTIVE The aim of this study was to evaluate the effect of feldspathic ceramic surface cleaning on micro-shear bond strength and ceramic surface morphology. MATERIAL AND METHODS Forty discs of feldspathic ceramic were prepared and etched with 10% hydrofluoric acid for 2 minutes. The discs were randomly distributed into five groups (n=8): C: no treatment, S: water spray + air drying for 1 m...

In this study, the influence of primer contamination on enamel bonding was analyzed. Adper Scotchbond Multi-Purpose (SMP), CLEARFIL SE Bond 2 (SE2), Universal (SBU) Adhesive, and Etchant (35% phosphoric acid; PA) were used. Ground bovine enamels divided into eight groups based protocols. The interfaces after an acid-base challenge observed via scanning electron microscopy to determine resistant...

Titanium Nitride (TiN) is a wear resistant and complementary metal oxide silicon (CMOS) compatible material that is increasingly being investigated for MEMS applications. Incorporating any new material into a MEMS device requires the development of a processing strategy. This paper discusses a wet-etching strategy for patterning and releasing TiN features on Cr sacrificial layers. Filtered arc ...

The effect of illumination on the hydrofluoric acid etching of AlAs sacrificial layers with systematically varied thicknesses in order to release and roll up InGaAs/GaAs bilayers was studied. For thicknesses of AlAs below 10 nm, there were two etching regimes for the area under illumination: one at low illumination intensities, in which the etching and releasing proceeds as expected and one at ...

A simple, flexible method of postfabrication positioning of resonance wavelengths of long-period cladding-modecoupled gratings is proposed. This method is based on changing the outer fiber diameter. Reducing the diameter by etching the fiber in HF acid shifts the loss peaks to higher wavelengths. A shift as large as 130 nm after 5 min of HF etching was observed for our strongest grating peak, c...

The stability and oxidation of copper nanoparticles stabilized with various ligands have been studied. Lauric acid-capped copper nanoparticles were prepared by a modified Brust-Schiffrin method. Then, ligand exchange with an excess of different capping agents was performed. Oxidation and stability were studied by UV-vis, XRD, and TEM. Alkanethiols and oleic acid were found to improve air stabil...