Friction stir processing (FSP) offers a unique opportunity to tailor the microstructure and improve mechanical properties due combination of extensive strains, high temperatures, high-strain rates inherent process. Reactive friction was carried out in order produce situ Al/(Al13Fe4 + Al2O3) hybrid nanocomposites on wrought/as-annealed (673 K) AA1050 substrate. The active mixture pre-ball milled...

The nanocomposites of polythiophene and carboxylated multiwalled carbon nanotubes (MWCNTs) were synthesized by in-situ chemical oxidative polymerization method using anhydrous ferric chloride (FeCl3) as an oxidant. The MWCNTs functionalized and ultrasonicated to obtain uniform dispersion within the polythiophene matrix. Field emission scanning electron microscopy was used to characterize the mo...

A carbon-based natural nanocomposite material comprising carbon quantum dots (CQDs) is dispersed in a chitosan matrix. The CQD–chitosan serves as solid polymer electrolyte layer of biomemristor with Au/CQD–chitosan/Al structure. active the deposited from its solution on top coplanar asymmetric nanogap (∼15 nm) Al–Au electrodes, patterned via adhesion lithography. presents high on/off ratio (>10...

One-dimensional carbon nanotubes (CNT), which are mechanically strong and flexible, enhance strength of the host metal matrix. However, the reduction of ductility is often a serious drawback. Here, we report significantly enhanced plastic flow strength, while preventing tensile ductility reduction, by uniformly dispersing CNTs inAlmatrix. Nanoscale plasticity and rupturing processes near CNTs w...

This study is focused on forming a fibrous-zinc oxide/ polyvinylidine fluoride (ZnO/PVDF) nanocomposite and characterizing its dielectric behavior. The nanocomposite is prepared in two steps. First, a network of nanoscale diameter ZnO fibers is produced by sintering electrospun PVA/Zinc Acetate fibers. Second, the ZnO fibrous nonwoven mat is sandwiched between two PVDF thermoplastic polymer fil...

Poly(lactic acid) is biodegradable polymer derived from renewable resources and non-toxic, which has become most interested polymer to substitute petroleum-based polymer. However, it has low glass transition temperature and poor gas barrier properties to restrict the application on hot contents packaging and long-term food packaging. The objectives of this research are: (a) to reduce coagulatio...

the aim of this study was to investigate the rate of water vapor permeability (wvp) and moisture sorption of starch-montmorillonite (mmt) nanocomposite films. the nanocomposite films were prepared using the casting method andglycerol was used as a plasticizer. the effect of glycerol concentration on wvp of the films was determined at 25°c with a relative humidity of 0-99% (inside and outside of...

Proton exchange membrane fuel cells (PEMFCs) are electrochemical devices that show the highest power densities compared to the other type of fuel cell. In this work, nanocomposite membranes used for proton exchange membrane fuel cells as poly(vinyl alcohol)/La2Ce2O7 (PVA-LC) with the aim of increasing the water uptake and proton conductivity. Glutaraldehyde (GA) was used as cross linking agent ...

A novel zinc oxide - agar nanocomposite was successfully synthesized using zinc chloride as a precursor. The nanocomposite was prepared using a domestic microwave oven. The prepared nanocomposites have been characterized by Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM) and UV- visible spectroscopy. The crystalline properties...