A comprehensive review of lubricant chemistry, technology, selection, and design / Syed Q. A. Rizvi. NOTE: The Society is not responsible, as a body, for the statements and opinions expressed in this publication. ASTM International does not endorse any products represented in this publication.

Bulk metallic glasses (BMGs) offer a great deal of potential through their near-theoretical strength, potentially high toughness and unique forming and molding traits. However, there are still a number of outstanding issues that bar their widespread use. This thesis describes the investigation of three research questions, each designed to further the scientific community’s understanding of BMGs...

The opinions, findings, and conclusions expressed in this publication are those of the principal investigators and the Missouri Department of Transportation. They are not necessarily those of the U.S. Department of Transportation, Federal Highway Administration. This report does not constitute a standard or regulation. ii ABSTRACT The main objective of this study was to determine the effect on ...

Subject area: Quality/Test Procedures Several recovery procedures for asphalt emulsion residue have been used over the years, but there is no one procedure that has been universally accepted. In this study three recovery methods are used to obtain the residue of the emulsified asphalt: 1) distillation (ASTM D 6997), 2) evaporation (ASTM D 6934) and, 3) the newly approved moisture analyzer balan...

Hybridization, especially where only variant natural lignocelluloses are combined, is fast receiving encouraging attention because it offers a range of properties that may be difficult to obtain with a single kind of reinforcement. In this study, tensile, flexural, and impact properties of hybridized kenaf/PALF-reinforced HDPE composite were studied. Sheets from which tensile, flexural, and imp...

Airborne particles that are collected using closed-face filter cassettes (CFCs), which are used widely in the sampling of workplace aerosols, can deposit in places other than on the filter and thereby may not be included in the ensuing analysis. A technique for ensuring that internal non-filter deposits are included in the analysis is to collect airborne particles within an acid-soluble interna...

Confusion in the literature about the definition and calculation of repetitive member factors is identified. This confusion casts some doubt on the validity of the 1.15 repetitive member factor permitted in ASTM standards D245 and D1990. DOI: 10.1061/(ASCE)ST .1943-541X.0000413. © 2012 American Society of Civil Engineers. CE Database subject headings: Wood; Material properties; Reliability. Aut...

En este trabajo se presenta un plan de mantenimiento automotriz basado en diagnóstico tribológico del aceite lubricante origen mineral grado SAE 20W50 multigrado, utilizado la lubricación motor combustión interna cuatro cilindros, 1800 cm3, posición diagonal, enfriado por anticongelante, con sistema bomba mecánica. Las muestras obtuvieron bajo diferentes condiciones uso: 0km, 1000km, 5000km y 8...

The electron beam melting (EBM) is a useful technique for fabricating alloys that are difficult to machine and require expensive tools as well as the presence of inert atmosphere for further treatments. Under vacuum, EBM provides a controlled environment, reducing the drawbacks of the alloys of their processing in a conventional manner and thereby improving their microstructure, which can enhan...

During their aquatic life cycle, nanoparticles are subject to environmentally driven surface modifications (e.g. agglomeration or coating) associated with aging. Although the ecotoxicological potential of nanoparticles might be affected by these processes, only limited information about the potential impact of aging is available. In this context, the present study investigated acute (96 h) and ...