PURPOSE To evaluate the implant-abutment interface area and the abutment screw loosening value when diamondlike carbon (DLC)-coated or titanium screws were used before and after cyclic loading. MATERIALS AND METHODS Thirty-six implants were divided into four groups according to the type of connection (external hexagon [EH] or internal hexagon [IH]) and the type of abutment screw (with [EHD/IH...

OBJECTIVES The purpose of this study was to determine the influence of platform switching on stress distribution of two different implant systems using three-dimensional (3D) finite element models. MATERIALS AND METHODS Six 3D finite element models were created to replicate two different implant systems with peri-implant bone tissue, in which six different implant-abutment configurations were...

Base on the concrete work of abutment belt conveyor bridge JIGCC project in Jazan, Saudi Arabia, finite element model hydration heat reaction during construction and maintenance period is established by taking actual field situation as input boundary condition. The verified temperature monitor data. It shows that curve good agreement with data, accurate enough. stress due to within allowable ra...

PURPOSE The aim of this study was to observe stress concentration in the implant, the surrounding bone, and other components under the pull-out force during the crown removal. MATERIALS AND METHODS Two 3-dimensional models of implant-supported conventional metal ceramic crowns were digitally constructed. One model was designed as a vertically placed implant (3.7 mm × 10 mm) with a straight ab...

Fractured abutment screws may be replaced; however, sometimes, the screw cannot be removed and the entire implant must be surgically removed and replaced. The aim of this study was to compare the fracture resistance of abutment retention screws made of titanium, polyetheretherketone (PEEK) and 30% carbon fiber-reinforced PEEK, using an external hexagonal implant/UCLA-type abutment interface ass...

OBJECTIVE The purpose of this study was to evaluate the mechanical behavior of two different straight prosthetic abutments (one- and two-piece) for external hex butt-joint connection implants using three-dimensional finite element analysis (3D-FEA). MATERIALS AND METHODS Two 3D-FEA models were designed, one for the two-piece prosthetic abutment (2 mm in height, two-piece mini-conical abutment...

Complex vortex flow patterns around bridge piers, especially during floods, cause scour process that can result in the failure of foundations. Abutment is a complex three-dimensional phenomenon difficult to predict with traditional formulas obtained using empirical approaches such as regressions. This paper presents test standalone Kstar model five novel hybrid algorithm bagging (BA-Kstar), dag...

BACKGROUND Cementing restorations to implants is a widely used clinical procedure. Little is known about the dynamics of this process. Using a systems approach and advanced computing software modeling this can be investigated virtually. These models require validation against real-life models. PURPOSE The study aims to consider the system effect of a crown, abutment, and cement flow under dif...