The benefits of sediment microbial fuel cells (SMFCs) go beyond energy generation for low-power applications. Aside from producing electrical energy, SMFCs can enhance the oxidation of reduced compounds at the anode, thus bringing about the removal of excessive or unwanted reducing equivalents from submerged soils. Moreover, an SMFC could be applied to control redox-dependent processes in sedim...

In replicate series of experiments in natural seawater, one in full darkness and the other in a 1:1 diurnal cycle with as little as ~5% of natural solar illumination, sunlight promoted calcareous deposition on cathodic stainless steel surfaces. As exemplified by scanning electron microscopy, the deposit that formed under the natural diurnal cycle, in the presence of photosynthetic biofilms, was...

Plasma-based ion implantation (PBII) is usually carried out with isotropic gaseous plasmas, such as a discharge in nitrogen. More recently, it has been applied using drifting plasmas, such as those produced by cathodic arcs, in order to allow efficient implantation of metallic species. The condensable nature of a cathodic arc plasma allows for the deposition of ion-stitched thin film coatings, ...

The fabrication and characterization of tungsten nanoelectrodes insulated with cathodic electrophoretic paint is described together with their application within the field of neurophysiology. The tip of a 127 mum diameter tungsten wire was etched down to less than 100 nm and then insulated with cathodic electrophoretic paint. Focused ion beam (FIB) polishing was employed to remove the insulatio...

Hydroxyethyl cellulose (HEC) was studied as corrosion inhibitor for mild steel and aluminium in 0.5 M H2SO4 solution using weight loss and electrochemical techniques. The results revealed that HEC inhibited corrosion of mild steel and aluminium in sulphuric acid environment. Inhibition efficiency was found to depend on concentration of the inhibitor. Impedance results revealed that HEC was adso...

Boron-doped diamond (BDD) has attracted increasing attention as a reliable and robust electrode material. This surface has shown its potential in water treatment and ozone generation, and its increased resistance to dopamine (DA) or serotonin foulings [1–3] makes it a promising candidate for bio-analysis [4–7]. Even though the native BDD is hydrogen-terminated, its surface can be modified by ad...

Graphene oxide (GO) was reduced by a rapid, effective and eco-friendly electrochemical method of repetitive cathodic cyclic potential cycling, without using any reducing reagents. The electrochemically reduced graphene oxide (ERGO) was characterized by UV–vis, EIS and zeta-potential measurements. Most of the oxygen functional groups in ERGO were successfully removed resulting in smaller charge ...

A sensitive method for the determination of chitosan (CTS) by cathodic stripping voltammetry is presented. The method exploits a pair of oxidation-reduction peaks of CTS at -0.62 V (vs. SCE) and -0.54 V (vs. SCE), and an enhancement of the peak current of CTS observed in a 0.05 mol l(-1) potassium hydrogenphthalate buffer solution (pH 2.5). The peak current is linear with the concentration of C...

Chopping of current and induction of high voltage spikes has been observed at the rising edge of cathodic vacuum arcs. It is argued that current chopping at the rising edge is similar to the current chopping effect that is well-know for the arc current approaching current-zero. Current chopping can generate high voltage spikes, and thus cathodic arc equipment should be protected against voltage...