The role of salivary media is essential during mastication and ingestion processes; yet it can hinder the performance of foreign materials in the oral cavity. The aim of this study was to examine the effects of applied load and applied electrical potential on the tribo-corrosion mechanisms of 316L stainless steel in an environment similar to oral cavity conditions. 316L stainless steel is a mat...

This study compared the abrasion resistance of direct composite resins cured by light-emitting diodes (LED) and halogen light-curing units. Twenty specimens (12 mm in diameter; 1.0 mm thick) of each composite resin [TPH (Dentsply); Definite (Degussa); Charisma (Heraus Kulzer)] were prepared using a polytetrafluoroethylene matrix. Ten specimens per material were cured with the LED source and 10 ...

A study was conducted to determine whether the mandibles of the detrito-/bryophagous groundhopper Tetrix tenuicornis are subject to mechanical wear as a result of feeding, as is the case for grasshoppers that feed on silica-rich grasses. Abrasion was evaluated by measuring the length and width of the 3rd incisor and length of the 4th incisor in adults of different ages collected under natural c...

This study evaluated the effect of air-particle abrasion protocols on the biaxial flexural strength, surface characteristics and phase transformation of zirconia after cyclic loading. Disc-shaped zirconia specimens (Ø: 15mm, thickness: 1.2mm) (N=32) were submitted to one of the air-particle abrasion protocols (n=8 per group): (a) 50μm Al2O3 particles, (b) 110μm Al2O3 particles coated with silic...

Introduction Aeolian abrasion is the dominant rock weathering mechanism on Mars. Ventifacts, defined as rocks whose shapes or textures have been modified by windblown particles, are the manifestation of this weathering mechanism and are found on Earth and Mars. Studies of ventifacts and related features at the well-traversed Spirit Mars Exploration Rover (MER) landing site provides insight into...

Introduction: Low resistance of composite resins to abrasion is a primary concern in the application of these materials for posterior restorations which are prone to high occlusal loads. This study compared the wear resistance of three types of composites. Methods: In this laboratory experiment, five specimens of each of the three types of composites (z250, Heliomolar, Opallis) were prepared...

the aim of this study was to assess the surface of yttrium-stabilized tetragonal zirconia (y-tzp) after surface treatment with lasers and airborne-particle abrasion.first, 77 samples of presintered zirconia blocks measuring 10 × 10 × 2 mm were made, sintered and polished. then, they were randomly divided into 11 groups (n=7) and received surface treatments namely, er:yag laser irradiation with ...