Steel slags are the major byproduct from the conversion of iron to steel in the basic oxygen (major type), electric arc and open hearth (minor type) steelmaking processes. Steel recovery from the slag results in a processed aggregate with both positive (wear resistant, skid resistant, rough textured, angular, well graded, stripping resistant) and negative (heavy, expansive) features. Considerab...

A special instrument has been built to measure the coercivity directly on steel sheets without having to cut samples. It will be used to perform the 8000 coercivity measurements which will be needed during the production of the ll'OOO ton of steel sheets for the LEP dipole magnets. The coercimeter allows local and directional coercivity measurements to be made on a steel sheet with an accuracy ...

The applications of stainless steel are one of the most reliable solutions in concrete structures to reduce chloride-induced corrosion problems and increase the structures service life, however, due to high prices of nickel, especially in many civil engineering projects, the austenitic stainless steel is replaced by the ferritic stainless steels. Compared with austenite stainless steel, the fer...

Recognizing that steel fibers can supplement the brittle tensile characteristics of concrete, many studies have been conducted on the shear performance of steel fiber reinforced concrete (SFRC) members. However, previous studies were mostly focused on the shear strength and proposed empirical shear strength equations based on their experimental results. Thus, this study attempts to estimate the...

Steel ball indentation and scratch adhesion testing of hot filament chemical vapour deposited diamond films onto AISI type 316 austenitic stainless steel substrates using two different interlayer systems, namely chromium nitride and borided steel, have been investigated. In order to compare the adhesion of these films with that of a well-known and strongly adherent system, detailed adhesion tes...

Occupational asthma (OA) can be induced by fumes of manual metal-arc welding on stainless steel. In recent years, the use of special stainless steels (SSS) with high chromium content has increased. This study presents two cases of OA caused by manual metal-arc welding on SSS. In both cases, the diagnosis of OA was based on respiratory symptoms, occupational exposure and positive findings in the...

Steel (SI) and white spotting (W) loci encode steel factor (c-kit ligand) and the c-kit tyrosine kinase receptor, respectively. Mutations at these loci affect migration and differentiation of primordial germ cells, neural crest-derived melanoblasts, and hematopoietic cells. In these processes, cell adhesion molecules are hypothesized to be crucial. We have examined the role of steel factor and ...

a low carbon al-killed ti-added steel was produced in mobarakeh steel complex in iran. mechanical properties and microstructural characterizations of steel in the as-cast, hot-rolled, cold-rolled and annealed conditions are presented. dilatometery tests were carried out to measure the finishing and annealing temperatures of steel. it was found that the addition of small amounts of ti increased ...

Steel ball surface-defect inspection was performed by using a new saddle-type eddy current sensor (SECS), which included a saddle coil and a signal conditioning circuit. The saddle coil was directly wound on the steel ball's outer bracket in a semi-circumferential direction. Driven by a friction wheel, the test steel ball rotated in a one-dimensional direction, such that the steel ball surface ...

The present Experimental investigation is to study the Mechanical Properties of the Fly ash concrete reinforced with steel fibers. The concrete composite comprises of steel fibers in different percentages and partial replacement of cement in different proportions. Steel fibers varied from 0%, 0.5%, 1% and 1.5% by weight of cement and replacement of fly ash varied from 0%, 10%, 20%, 30% and 40% ...