variety of energy–ecology optimizing means that optimum result of fuel combustion is focused not only on the direct efficiency of its usage but also on minimum environmental damage. best possible fuel combustion connected with controlled level of chemical underburn is considered to be one of the simpliest, cheapest and the most effective methods of optimizing. it is essential to notice that the...

In order to directly control the premixed combustion phasing, a Jet Controlled Compression Ignition (JCCI) for diesel premixed compression ignition systems is investigated. Experiments were conducted on a single cylinder natural aspirated diesel engine without EGR at 3000 rpm. Numerical models were validated by load sweep experiments at fixed spark timing. Detailed combustion characteristics we...

It is attempt in pulverized coal injection (PCI) in blast furnace tuyeres to increase the injection rate without increasing the amount of unburned char inside the stack of the blast furnace. The unburned char can cause problems in the blast furnace operation, such as reduced permeability, undesirable gas/temperature distribution, excessive coke erosion and significant char carryover. In the nea...

Hybrid combustion technology has recently been employed in the sounding rocket developments to support the science experiments of academic applications and the establishment of a viable flight test platform for space components development. Due to its safety nature in material handling and combustion processes, hybrid rockets are suitable for university and research institute environments for a...

Particle size distribution from biomass combustion is an important parameter as it affects air quality, climate modelling and health effects. To date, particle size distributions reported from prior studies vary not only due to difference in fuels but also difference in experimental conditions. This study aims to report characteristics of particle size distributions in well controlled repeatabl...

Original scientific paper Laboratory tests were conducted to study coal spontaneous combustion at low-temperature (30 ÷ 200 °C) in the air of reduced oxygen (10 ÷ 21 %) and low methane concentrations (0 ÷ 3 %). The production of carbon monoxide in coal spontaneous combustion was analysed. The test results show that both oxygen and methane concentrations affect coal spontaneous combustion. At gi...

Volumetric combustion has been developed to realize a high substitution ratio of biomass in co-firing boilers, which features an intensive flue gas internal recirculation inside furnace. However, the characteristics of NOx and SOx emissions in large-scale boilers with volumetric combustion were not fully clear. In this paper, an Aspen Plus model of volumetric combustion system was built up base...

gas motion within the cylinder is one of the major factors that control the combustion process in spark ignition engine. it also has significant impact on heat transfer. both the bulk gas motion and the turbulence characteristics of the flow are important and governing the overall behavior of the flow. an arrangement for obtaining a stratified charge, using port injection, is proposed for a cur...

Experiments were conducted to determine exhaust emissions and combustion characteristics of a conventional diesel engine (CE) and high grade low heat rejection diesel engine (LHR) (with air gap insulated piston with superni (an alloy of nickel) crown, air gap insulated liner with superni insert and ceramic coated cylinder head)with different operating conditions [normal temperature and pre-heat...