Abstract PAN-based carbon fiber was surface-modified with silane coating, and a composite material prepared using PI resin as matrix. The structure surface properties of fibers were studied by means X-ray photoelectron spectroscopy (XPS) SEM. tensile strength the measured tester, friction micro-nano mechanics comprehensive test system. results show that treatment coating can improve roughness c...

O This in vitro treatments, 3 luting agents and thermocycling on microtensile bond strength (μTBS) to zirconia ceramic. Material and Methods: A total of 18 blocks (5x5x4 mm) were fabricated from zirconia ceramic (ICE Zirkonia) and duplicated into composite blocks (Alphadent). Ceramic blocks were divided into 3 groups (n=6) according to the following surface treatments: airborne-particle abrasio...

A new Cu current collector was prepared by introducing a mussel-inspired polydopamine coating onto a Cu foil surface to improve the electrochemical performance of a Si electrode. The polydopamine coating covalently bonded the polymeric binder (with hydroxyl functional groups) via a condensation reaction. The coating improved the adhesion strength between the Si composite electrode and the Cu cu...

METHODS Open-irrigated, 4and 8-mm RF ablation catheter tips were insulated partially by coating one-half of their surfaces with a layer of vinyl, silicone, vinyl–silicone, polyurethane, or a composite of aluminum oxide/boron nitride (AOBN). These coated catheters or corresponding noninsulated catheters were positioned with 10 g of force on viable bovine myocardial tissue during RF application i...

Ni-Fe/Si3N4 nanocomposite coatings with various ratio of Si3N4 to Na-saccharine were prepared by electrodeposition technique. The effect of Si3N4 nanoparticulates in the Ni-Fe nanocomposite coatings was investigated in relation to the ratio of Si3N4 to Na-saccharine in the plating bath. X-ray diffraction analysis showed that the Ni-Fe nanocomposite coating has face center cubic structure (FCC)....

a r t i c l e i n f o The composite film of carbon nanotubes and silicon carbide nanowires was synthesized directly on the silicon substrate by the catalyst-assisted method. The carbon nanotubes crimped together decorated with silicon carbide nanowires covering the whole substrate. The appropriate amount of aluminum powders is a crucial factor to achieve the composite film. The composite film e...

Abstract Deterred-coating DIANP gun propellant was prepared by the two-step process called “polymer composite materials deterring and energetic coating”. The performance of energy static combustion deterred-coating investigated explosive heat closed-bomb test. results show that compared with propellant, decreased only about 3.2%, but it had better progressivity low temperature sensitivity effec...

Artificially structured coatings are widely employed to minimize materials deterioration and corrosion, the annual direct cost of which is over 3% of the gross domestic product (GDP) for industrial countries. Manufacturing higher performance anticorrosive coatings is one of the most efficient approaches to reduce this loss. However, three-dimensional (3D) structure of coatings, which determines...

We demonstrate a facile, two-step coating/calcination approach to grow a uniform MnO nanoparticle@mesoporous carbon (MnO@C) composite on conducting substrates, by direct coating of the Mn-oleate precursor solution without any conducting/binding reagents, and subsequent thermal calcination. The monodispersed, sub-10 nm MnO nanoparticles offer high theoretical energy storage capacities and cataly...

Self-aggregated Li4Ti5O12 particles sandwiched between graphene nanosheets (GNSs) and single-walled carbon nanotubes (SWCNTs) network are reported as new hybrid electrodes for high power Li-ion batteries. The multi-layer electrodes are fabricated by sequential process comprising air-spray coating of GNSs layer and the following electrostatic spray (E-spray) coating of well-dispersed colloidal L...