Spark plasma sintering (SPS) method, as plasma activated sintering, is a method applicable for rapid sintering of metals and ceramics. Owing to the advantage of rapid heating, the alumina ceramics obtained by SPS have a grain size and density comparable to those of hot pressed ones. The increase of densification rate may be related to some difference in ion transport characteristics. This study...

Efficient numerical finite-element analysis of creeping concrete structures requires the use of Kelvin or Maxwell chain models, which are most conveniently identified from a continuous retardation or relaxation spectrum, the spectrum in turn being determined from the given compliance or relaxation function. The method of doing that within the context of solidification theory for creep with agin...

*Lawrence J. Hagen, USDA-ARS, Wind Erosion Research Unit, Throckmorton Hall 2004, Kansas State University, Manhattan, KS 66506. *Corresponding author: [email protected]. Contribution from USDA-ARS in cooperation with Kansas Agric. Exp. Sta., Contribution No. 99-389-A. ABSTRACT Assessment of wind erosion parameters applicable to the field scale using wind tunnels requires attention to both scal...

The 60 min creep data from National Type Evaluation Procedure (NTEP) tests performed at the National Institute of Standards and Technology (NIST) on 65 load cells have been analyzed in order to compare their creep and creep recovery responses, and to compare the 60 min creep with creep over shorter time periods. To facilitate this comparison the data were fitted to a multiple-term exponential e...

Carefully designed indentation creep experiments and detailed finite-element computations were carried out in order to establish a robust and systematic method to extract creep properties accurately during indentation creep tests. Samples made from an Al–5.3mol%Mg solid-solution alloy were tested at temperatures ranging from 573 to 773K. Finite-element simulations confirmed that, for a power-la...