nanocrystalline zro2 with particle size of about 38 nm was directly synthesized by sol-gel auto-combustion method. the overall process involved three steps: formation of homogeneous sol at 50-55°c; formation of dried gel at 110°c, and combustion of the dried gel at 400°c. experiments revealed that zro2 dried gel derived from glycine (fuel) and nitrate sol exhibited self propagating combustion a...

mechanical properties of wood/plastic composites manufactured by polyethylene and polypropylene blends (pp/hdpe) were studied. the sebs (styrene-ethylene butylene-styrene) and epdm (ethylene-propylene diene monomer) were used as compatibilizers to improve the compatibility and miscibility of the interface between hdpe and pp phases. the sawdust and polymers were compounded using an internal mix...

modification of the mechanical properties of silicone rubber were considered for drug delivery systems by using high-energy electron beam (e-beam). in this research work, two different medical grades of silicone rubbers were used to prepare matrices containing 10wt% progesterone with 2 mm thickness and irradiated with e-beam at dose range of 25 up to 200 kgy. then, the mechanical properties as ...

thermoplastic honeycombs based on polypropylene are one of the latest types of cores used in sandwich structures. up to now there have been few experimental and modelling studies on the mechanical behaviour of sandwich structures with thermoplastic cores. in this paper, by considering the similar properties of foams and thermoplastic honeycombs, attempts are made to model the static indentation...

in this study, the possibility of producing wood-plastic panels was studied using two different blending methods including melt blend and dry blend. wood-plastic panels were made from recycled high density polyethylene (as resin) and mdf waste (as natural fiber) at 60, 70 and 80% by weight filler loading. nominal density and dimensions of the panels were 1g/cm3 and 35×35×1 cm, respectively. the...

Abstract: Horizontal continuous casting is widely used to produce semi-finished and finished metallic products. Homogeneity in metallurgical characteristics and mechanical properties in such products is of importance. In the present work microstructure and mechanical properties of a horizontal continuous cast pipe have been studied. Microstructural features were investigated by an optical mi...

Performance of various functions of the tissue structure depends on porous scaffold microstructures with specific porosity characteristics that influence the behavior of the incorporated or ingrown cells. Understanding the mechanical properties of porous tissue scaffold is important for its biological and biomechanical tissue engineering application. This paper presents a computer aided charact...

steel 2205 is one of the most famous duplex stainless steels. the microstructure of this steel composed of ferrite and austenite in similar amount. therefore, in order to improve mechanical properties through microstructure, thermo mechanical processes such as controlled hot rolling and forging should be applied. it is not possible to employ the usual heat treatment. it shows the importance of ...

An analytical equation of state was applied to calculate the thermodynamic properties for argon.The equation of state is that of Song and Mason. It is based on a statistical-mechanical perturbationtheory of the hard convex bodies and can be written as fifth-order polynomial in the density. Thereexist three temperature-dependent parameters: the second virial coefficient, an effective molecularvo...

Electro-thermo-elastic stress analysis of piezoelectric polymeric thick-walled cylinder reinforced by boronnitride nanotubes (BNNTs) subjected to electro-thermo-mechanical fields is presented in this article. The electro-thermo-elastic properties of piezoelectric fiber reinforced composite (PEFRC) was studied by a modified XY micromechanical model capable of exhibiting full coupling relati...