This study demonstrates the application feasibility of electrochemical impedance spectroscopy (EIS) in measuring estrogen (17β-estradiol) in gas phase. The present biosensor gives a linear response (R2 = 0.999) for 17β-estradiol vapor concentration from 3.7 ng/L to 3.7 × 10-4 ng/L with a limit of detection (3.7 × 10-4 ng/L). The results show that the fabricated biosensor demonstrates better det...

We present the first demonstration of a passive, contactless method to interrogate electrochemical impedance (EI) via a microfabricated MEMS coil. EI measurement was achieved using the principle of reflected impedance between a pair of inductively coupled coils. Ionic concentration and electrolyte temperature were wirelessly transduced from measurement electrodes connected to a microfabricated ...

In this paper a system is described for impedance measurements in electrochemical cells, integrated by a fast potentiostat, signal generator, digital transient recorder and a computer interface. The treatment of the signal is made by obtaining the correlation between the response cell signal with the in-phase and in-quadrature signals, as is made in the frequency response analysis systems, but ...

This paper focused on the characterization of electrochemical behavior of a martensitic stainless steel in the acidic solutions. For this purpose, electrochemical parameters were derived from potentiodynamic polarization, Mott Schottky analysis and electrochemical impedance spectroscopy (EIS) techniques. The potentiodynamic polarization results showed that corrosion current density of AISI 420 ...

The effect of chloride ions concentration on the electrochemical behavior of AISI 410 stainless steel in the simulated concrete pore (0.1 M NaOH + 0.1 M KOH) solution was investigated by various electrochemical methods such as Potentiodynamic polarization, Mott–Schottky analysis and electrochemical impedance spectroscopy (EIS). Potentiodynamic polarization curves revealed that increasing chlori...

Electrochemical impedance spectroscopy (EIS) is recognized to be a powerful and noninvasive technique to test the integrity of protective coatings on memorials, but commercial EIS systems are rather costly though versatile devices. This paper describes a low cost and portable EIS system that is based on a compact digital signal processor (DSP) board and embeds the potentiostatic function so tha...

Porous electrodes provide high-surface-area supports for the catalysts of many reactions, but the influences of electrode preparation conditions on electrocatalysts are not always well understood. Electrochemical impedance spectroscopy ~EIS! can provide extensive information about an electrode, but the models describing the spectra are often too idealized to draw useful conclusions. We describe...

We present an integrated label-free biosensor based on surface plasmon resonance (SPR) and Faradaic electrochemical impedance spectroscopy (f-EIS) sensing modalities, for the simultaneous detection of biological analytes. Analyte detection is based on the angular spectroscopy of surface plasmon resonance and the extraction of charge transfer resistance values from reduction-oxidation reactions ...