Article history: Received 22 November 2012 Received in revised form 13 June 2014 Accepted 1 July 2014 Available online 8 July 2014

Article history: Received 27 May 2013 Received in revised form 4 June 2014 Accepted 19 June 2014 Available online 26 June 2014

Forced vibration analysis of plate is growing research subject as plates are used for manufacturing many mechanical structures. The analytical solutions have been found for plates with specified mass and stiffness but for the plates with uncertain mass and stiffness are studied very limitedly. The uncertain parameters play an important role in the design of practical mechanical system. It becom...

abstract: compaction under tractors tires is of special concern because the weight of these machines has increased dramatically in the last years. these machines and others associated with crop cultural practices weight enough to significantly compact the soil, especially if the soil is soft with high moisture content during tilling, planting, or harvesting. the stress distribution and the size...

a plain strain analysis of frictional rolling contact on an elastic graded coating is presented in this paper. finite element method is applied to gain an understanding of the stresses and contact zone properties caused during rolling contact. the effects of friction, material stiffness ratio and coating thickness on stresses in contact zone and coating/substrate interface are studied. shear mo...

there are many parameters that affect the sheet hydroforming process such as fluid pressure, material properties, interfacial friction between blank and tool surfaces, etc. in this paper, a fem-based taguchi method is used to determine the effects of forming parameters on the quality of part formability in the process of hydrodynamic deep drawing assisted by radial pressure. four important form...

0

longevity of osseointegrated implants are intensely influenced by biomechanical factors. control of these factors prevents mechanical complications, which include fracture of screws, components, or materials veneering the framework. in this study, the impact of length and threads pitch of dental implants on the stress distribution and maximum von mises stress in implant-abutment complex and jaw...

a two-dimensional single particle finite element model was used to examine the effects of particle fragmental pattern on the average molecular weights, polymerization rate and particle overheating in heterogeneous ziegler-natta olefin polymerization. a two-site catalyst kinetic mechanism was employed together with a dynamic two-dimensional molecular species in diffusion-reaction equation. the i...