In this paper, the test purpose will be to assess whether or not the accelerated model proposed by Eyring will be able to translate results for the shape and scale parameters of an underlying Weibull model, obtained under two accelerating using conditions, to expected normal using condition results for these parameters. The product being analyzed is a new type of insulate fluid, and the acceler...

The solar gravity heat pipe has been widely used for solar thermal water heating because of its high efficient heat transfer and thermal diode characteristics. Operated on fluctuant and low intensity solar radiation conditions, a solar gravity heat pipe may frequently start up. This severely affects its solar collection performance. To enhance the thermal performance of the solar gravity heat p...

In this work, a Homotopy Perturbation Solution of magnetohydrodynamic (MHD) model of boundary-layer equations for an electrically conducting Nanofluid flow bounded by an infinite parallel vertical permeable plates is to be introduced. This model is applied to study the mass and heat transfer of an unsteady nanofluid, incompressible flow with suction, internal heat generation, Hall Effect and Ch...

a Young Researchers Club, Kermanshah Branch, Islamic Azad University, Kermanshah, Iran b Department of Mechanical Engineering, University of British Columbia Vancouver, Canada Forced convection boundary layer magneto-hydrodynamic (MHD) flow of a nanofluid over a permeable stretching plate is studied in this paper. The effects of suction-injection and viscous dissi 1 pation are taken into accoun...

Abstract—Heat transfer due to forced convection of copper water based nanofluid has been predicted by Artificial Neural network (ANN). The present nanofluid is formed by mixing copper nanoparticles in water and the volume fractions are considered here are 0% to 15% and the Reynolds number are kept constant at 100. The back propagation algorithm is used to train the network. The present ANN is t...

Sabine and Eyring equations are commonly used to estimate the reverberation time (RT) in concert halls. Derivations of the two equations are based on well-defined and different physical assumptions, and they are both slightly different from the realistic condition in actual halls. In many researches so far, comparatively simple room shapes have been utilized to study the question on which equat...

BACKGROUND AND OBJECTIVES Bacterial resistance to conventional antibiotics has become a widespread public health problem. The aim of this study was to investigate the influence of zinc oxide nanoparticles (ZnO NPs) on the antibacterial activity of several conventional antibiotics against Pseudomonas aeruginosa. MATERIALS AND METHODS ZnO NPs were prepared by solvothermal method and dispersed i...

This article reports a recent study on the application of a two-phase closed thermosyphon (TPCT) in a thermosyphon for economizer (TPEC). The TPEC had three sections of equal size; the evaporator, the adiabatic section, and the condenser, of 250 mm × 250 mm × 250 mm (W × L × H). The TPCT was a steel tube of 12.7-mm ID. The filling ratios chosen to study were 30, 50, and 80% with respect to the ...

In this study, the steady forced convection flow and heat transfer due to an impermeable stretching surface in a porous medium saturated with a nanofluid are investigated numerically. The Brinkman-Forchheimer model is used for the momentum equations (porous medium), whereas, Bongiorno's model is used for the nanofluid. Uniform temperature and nanofluid volume fraction are assumed at the surface...

Pool boiling heat transfer characteristics of Al2O3 -water nanofluids is studied experimentally using a NiCr test wire of 36 standard wire guage diameter. The experimental work mainly concentrated on (1) change of critical heat flux with different volume concentrations of nanofluid and (2) flow visualization of pool boiling using a fixed concentration of nanofluid at different heat flux values....