Submerged arc welding is preferred over other methods of welding because of its inherent qualities like easy control of process variables, high quality, deep penetration, smooth finish, capability to weld thicker sections. Since the development of submerged arc welding process, welding engineers are striving for reduction in welding cost without compromise in the performance of the weld. Flux u...

We investigated the effect of welding parameters on ultimate tensile strength of structural steel, ST37-2, welded by Metal Active Gas welding. A fractional factorial design was used for determining the significance of six parameters: wire feed rate, welding voltage, welding speed, travel angle, tip-to-work distance, and shielded gas flow rate. A regression model to predict ultimate tensile stre...

Sensing plays a key role in automating and controlling welding processes. Although arc light sensing has advantages over through-the-arc sensing for arc length control and seam tracking, the current technology relies on experimental data and lacks theoretical foundation. To improve measurement accuracy, this work addresses the theoretical foundation for arc light sensing. A theoretical model ha...

This paper describes the relationships between ultra-violet emission, ozone generation and CrVI production in MIG welding which were measured as a function of shield gas flow rate, welding voltage, electrode stick-out and shield gas composition using an automatic welding rig that permitted MIG welding under reproducible conditions. The experimental results are interpreted in terms of the physic...

Studies in the field of environmental epidemiology indicate that for the adverse effect of inhaled particles not only particle mass is crucial but also particle size is. Ultrafine particles with diameters below 100 nm are of special interest since these particles have high surface area to mass ratio and have properties which differ from those of larger particles. In this paper, particle size di...

Purpose. Research of the influence modulation arc processes on characteristics clad metal with revealing dependences chemical composition and geometrical dimensions parameters, as well development mathematical models these purpose predicting results to improve quality deposited layers.
 Methods research. Well-known methods surfacing research were used:
 spectral analysis composition, ...

Arc welding is a common unit operation in the construction industry, where frequent changes in location and welding position make it more difficult to control fume exposures than in industries where fixed locations are the norm. Welders may be exposed to a variety of toxic airborne contaminants including manganese (Mn) and hexavalent chromium (CrVI). Local exhaust ventilation (LEV) is a well-kn...

This study assessed exposure to extremely low frequency (ELF) magnetic fields of welders and other metal workers and compared exposure from different welding processes. Exposure to ELF magnetic fields was measured for 50 workers selected from a nationwide cohort of metal workers and 15 nonrandomly selected full-time welders in a shipyard. The measurements were carried out with personal exposure...