When polymeric solids slide against other solids such as steel there appears to be no way to predict either the friction of the system or the wear life of the polymer from handbook data. Friction and wear vary over wide ranges when sliding speed, applied load and system temperature are varied. Neither have thermal analyses of the sliding system produced satisfying results, partly because of the...

Today a major environmental problem is global warming that is mainly caused due to exhaust and emission of gases. The only way to reduce their ill-effect is by improvement in fuel efficiency of I.C. engines, where most of the power is lost to overcome the friction. In this work, nanoporous anodized layer is formed on an aluminium substrate surface by anodization. Anodization was carried out at ...

In this research, surface composite layers containing nano sized TiB2, Al2O3-TiB2, ZrO2 and CNT particles have been fabricated on Aluminum alloy substrates by friction stir processing. The effects of different processing variables such as number of passes and strengthening particle distribution, hardness, and wear properties of surface nano...

Friction is a dissipative irreversible process; therefore, entropy is produced during frictional contact. The rate of entropy production can serve as a measure of degradation (e.g. wear). However, in many cases friction leads to self-organization at the surface. This is because the excess entropy is either driven away from the surface, or it is released at the nanoscale, while the mesoscale ent...

INTRODUCTION Artificial joints have been increasingly used in treatment of physically disabled people who have severely damaged joints. In artificial joint, ultra high molecular weight polyethylene (UHMWPE) has been usually employed as a buffer because of its very low friction coefficient, high wear resistance, high impact strength, and biocompatibility. [1]. When artificial joints were replace...

High availability and low operational costs are critical for industrial systems. While industrial equipments are designed to endure several years of uninterrupted operation, their behavior and performance will eventually deteriorate over time. To support service and operation decisions, it is important to devise methods to infer the condition of equipments from available data. The monitoring of...

Polytetrafluoroethylene (PTFE) is an important engineering material. When rubbed or slid against a hard surface, PTFE exhibits a low coefficient of friction but a high rate of wear. These unique properties of the polymer have encouraged many mechanistic and physical examinations of the processes involved in the friction and wear of this polymer. A section of such work carried out over the past ...

We consider fretting wear due to tangential oscillations of two contacting bodies. For small oscillation amplitudes, the wear occurs only in a circular slip zone at the border of the contact area. With increasing number of cycles, the wear profile tends to a limiting form, in which no further wear occurs. Under assumption of a constant coefficient of friction, the limiting form of the wear prof...

In the present study, CrN, TiN and (Ti, Cr)N coatings were deposited on D6 tool steel substrates. Physical and mechanical properties of coatings such as microstructure, thickness, phase composition, and hardness were evaluated. Phase compositions were studies by X-ray diffraction method. Mechanical properties were determined by nano-indentation technique. The friction and wear behaviour of the ...