An investigation into the mixed mode fracture of steel fiber reinforced concrete (SFRC)beams with one percent volume fraction of steel fiber is presented. A series of notched beams withdifferent notch depths and locations are tested under three-point bending. The test results for apparentfracture toughness, crack trajectories, and fracture energy are presented. The crack paths for SFRCand plain...

Surfaces of carbon fibre roving were modified by means of a low temperature plasma treatment to improve their bonding with mineral fines; the latter serving as an inorganic fibre coating for the improved mechanical performance of carbon reinforcement in concrete matrices. Variation of the plasma conditions, such as gas composition and treatment time, was accomplished to establish polar groups o...

fi ber reinforced plastic (FRP) re. nforcement is one of the most promising new developments for concrete structures. FRP reinforcing elements provide lighter, easier to assemble, and more durable structures that are free of the deterioration caused by corrosion of steel. FRPs consist of synthetic or organic highstrength fibers, most of which are impregnated with a resin matrix. They are availa...

The properties of chloride penetration of hybrid fiber reinforced self-compacting concrete (SCC) were investigated in this study. The results show that the chloride penetration resistance of concrete can be improved by single incorporation either carbon or cellulose fibers. The concrete chloride diffusion coefficient DRCM of 12-cm length carbon SCC with fiber content of 1.7, 2.72, and 3.4 kg/m3...

objective: fiber-reinforced composite (frc) posts have recently become more popular for restoring endodontically treated teeth because of providing esthetics, better stress distribution and lower risk of root fracture. resistance against tensile forces dislodging the post from the root canal is a prerequisite for these posts. this study aimed to evaluate the tensile retention (strength) of intr...

the influence of maleic anhydride-polypropylene (mapp) (0, 2, 3 and 5%) as a compatibilizer on the wettability of polypropylene/wood flour/glass fiber hybrid composites was studied by using the contact angle determination technique. sample slats with a cross section of 10×70 mm were made by a twin screw extruder. specimens were conditioned at room temperature and the angles between the water dr...

The epoxy/glass fiber/organo-montmorillonite (OMMT) nanocomposites were prepared by hand lay up method. In the previous work, the flexural and morphological properties of the epoxy/glass fiber/OMMT were studied. In this work, the epoxy nanocomposites were characterized by X-ray diffraction (XRD), differential scanning calorimetry (DSC) and water absorption tests. The exfoliation of OMMT in epox...

Natural fibers are emerging as low cost, lightweight and apparently environmentally superior alternatives to glass fibers in composites. We review select comparative life cycle assessment studies of natural fiber and glass fiber composites, and identify key drivers of their relative environmental performance. Natural fiber composites are likely to be environmentally superior to glass fiber comp...

In this study, waste tire powder and waste liquid crystal display (LCD) glass sand are used as recycled materials. With a fixed water to binder ratio (W/B = 0.4), the use of fly ash and slag as cementreplacement materials. waste tire powder and waste LCD glass sand, which passed the sieve screen size # 30(0.595 mm), were used to replace fine aggregates at 0%, 5% and 10% in producing lightweight...