A coupled reactor/furnace simulation has been conducted for a 100 kt/a SL-II naphtha cracking furnace containing both long-flame and radiation burners. The computational fluid dynamics approach was used to simulate the flow, combustion and radiative heat transfer in the furnace. The software packages COILSIM1D and SimCO were used to account for the cracking process in the reactor coils. The sim...

Indium tin oxide (ITO) thin films were deposited on glass substrates by RF sputtering using an ITO ceramic target (In2O3-SnO2, 90-10 wt. %). After deposition, samples were annealed at different temperatures in vacuum furnace. The post vacuum annealing effects on the structural, optical and electrical properties of ITO films were investigated. Polycrystalline...

The improvement of the physical properties of Indium Tin Oxide (ITO) layers is quite advantageous in photovoltaic applications. In this study the ITO film is deposited by RF sputtering onto p-type crystalline silicon (c-Si) with (100) orientation, multicrystalline silicon (mc-Si), and glass substrates coated with ZnO and annealed in vacuum furnace at 400°C. Electrical, optical, structural a...

Rapid thermal consolidation of doped silica soot in a silicon carbide lined kiln subjected to microwave radiation is reported. The fabricated through flame hydrolysis deposition and peak temperatures within the reach >1350 ° C after 18 minutes irradiation. glass underwent Newtonian cooling with an e ?1 approximately 5 minutes. Optical characteristics planar layer are compared against traditi...

Most of the iron in the world is produced using a blast furnace process, which has iron ore (iron oxides) and coke as its raw materials. When pellets are used in a blast furnace, the iron burden material is charged in the form of pellets and fine, iron-rich by-products are charged typically in the form of cold-bonded briquettes at the top of the blast furnace. Coke is the primary fuel and reduc...

Bei der additiven Fertigung und beim thermischen Vorspannen von Glas ist dessen Festigkeit für den aufgrund des Herstell- bzw. Veredelungsprozesses relevanten Temperaturbereich nur wenig erforscht. Um die Auswirkungen unterschiedlicher Temperaturen auf Werkstoffs näher bestimmen zu können, wurde Doppelringbiegeversuch nach EN 1288-5 mit einer Universalprüfmaschine Ofen an Glasplatten Raumtemper...

BiVO4 thin film photoanodes were grown by vapor transport chemical deposition on FTO/glass substrates. By controlling the flow rate, the temperatures of the Bi and V sources (Bi metal and V2O5 powder, respectively), and the temperature of the deposition zone in a two-zone furnace, single-phase monoclinic BiVO4 thin films can be obtained. The CVD-grown films produce global AM1.5 photocurrent den...

We report a multipurpose furnace designed for studies using synchrotron radiation on polycrystalline materials, namely, metals, ceramics, and (semi)crystalline polymers. The furnace has been designed to carry out three-dimensional (3D) x-ray diffraction measurements but can also be used for other types of synchrotron radiation research. The furnace has a very low thermal gradient across the spe...