A Blast furnace is an investment in the future. It is necessary that there is the proper dimensioning of all the equipment, systems and components as well as incorporation of technologies which assure the desired production and quality so that improved performance of the blast furnace can be achieved. Gas is one of the major resources of nature. Gas distribution across any part is processed by ...

This study presents and implements a corrosion-monitoring wireless sensor platform, EPS (Events as Power Source), which monitors the corrosion events in reinforced concrete (RC) structures, while being powered by the micro-energy released from the corrosion process. In EPS, the proposed corrosion-sensing device serves both as the signal source for identifying corrosion and as the power source f...

Corrosion is one of the main causes affecting durability of structures. Corrosion effects on structures cannot be ignored and replaced. To understand the performance of structures there is a need to study the rate at which different corrosion levels occur. Hence the present investigation has been taken up to study the behaviour of NBS (National Bureau of Standard) beam specimens made up of Ordi...

Many parameters influencing corrosion degradation are time variant and the corrosion process is thus subject to temporal variability, the real characteristics of which are commonly neglected in reliability assessment. After a short overview on the quantitative modeling of corrosion loss, a comparison is made between different temporal models of corrosion degradation and the consequences of appl...

High purity Flibe was prepared for corrosion study. Fundamental corrosion experiments in static condition were performed on the structural material for Flibe blanket and Material Research Loop, which is non-isothermal forced convection loop simulating the blanket condition. Corrosion rate for the structural materials in static condition was estimated as small as 0.83-5.4 μm/yr in the high purit...

The effects of disinfection and biofilm on the corrosion of cast iron pipe in a model reclaimed water distribution system were studied using annular reactors (ARs). The corrosion scales formed under different conditions were characterized by X-ray diffraction (XRD), energy dispersive spectroscopy (EDS), and scanning electron microscopy (SEM), while the bacterial characteristics of biofilm on th...

About a century ago, researchers first recognized a connection between the activity of environmental microorganisms and cases of anaerobic iron corrosion. Since then, such microbially influenced corrosion (MIC) has gained prominence and its technical and economic implications are now widely recognized. Under anoxic conditions (e.g., in oil and gas pipelines), sulfate-reducing bacteria (SRB) are...

Title of Dissertation: CREEP CORROSION OVER PLASTIC ENCAPSULATED MICROCIRCUIT PACKAGES WITH NOBLE METAL PREPLATED LEADFRAMES Ping Zhao, Doctor of Philosophy, 2005 Dissertation Directed By: Dr. Michael Pecht, Professor, Department of Mechanical Engineering Field failures were observed to be caused by the bridging of corrosion products across lead fingers. This phenomenon was identified as creep ...

A corrosive environment leaves in-service conductive structures prone to subsurface corrosion which poses a severe threat to the structural integrity. It is indispensable to detect and quantitatively evaluate subsurface corrosion via non-destructive evaluation techniques. Although the gradient-field pulsed eddy current technique (GPEC) has been found to be superior in the evaluation of corrosio...