The interaction of thermal radiation with conduction and laminar natural convection in a vertical circular pin, situated at participating gas, is numerically investigated. An absorbing and emitting gas is considered, and treated to be a gray participating media. Under the idealizing of gray gas, the Rosselan4 approximation is employed to describe the radiative heat flux in the energy equation. ...

This article presents a numerical method to find the heat flux in an inhomogeneous inverse heat conduction problem with linear boundary conditions and an extra specification at the terminal. The method is based upon applying the satisfier function along with the Ritz-Galerkin technique to reduce the approximate solution of the inverse problem to the solution of a system of algebraic equations. ...

Abstract: During solidification and casting in metallic molds, the heat flow is controlled by the thermal resistance at the casting-mold interface. Thus heat transfer coefficient at the metal- mold interface has a predominant effect on the rate of heat transfer. In some processes such as low pressure and die-casting, the effect of pressure on molten metal will affect the rate of heat transfer a...

We examine the temperature dependence of thermal conductivity of one dimensional nonlinear (anharmonic) lattices with and without on-site potential. It is found from computer simulation that the heat conductivity depends on temperature via the strength of nonlinearity. Based on this correlation, we make a conjecture in the effective phonon theory that the meanfree-path of the effective phonon i...

This paper presents an exact analytical solution for two-dimensional conductive heat transfer in spherical composite pressure vessels .The vessels are in spherical shape and fibers are winded in circumferential direction. The analytical solution is obtained under the general boundary conditions which consist of convection, conduction and radiation inside/outside of vessel. The heat transfer equ...

A simple mathematical model of an indirect-fired strip annealing furnace for real-time control and optimization purposes is developed. The considered furnace is part of a hot-dip galvanizing line and is used for continuous heat treatment of steel strips. The heat that is released during the combustion process inside the radiant tubes is calculated by means of steady-state mass and enthalpy bala...

Analytical series solution is proposed for the transient boundary-value problem ofmultilayer heat conduction in r–h spherical coordinates. Spatially non-uniform, but time-independent, volumetric heat sources may exist in the concentric layers. Proposed solution is valid for any combination of homogenous boundary conditions of the first or second kind in the h -direction. However, inhomogeneous ...

Investigation to evaluate axial wall heat conduction has been conducted for heat transfer in a laminar flow circular tube with two classical thermal boundary conditions at the outside wall. The tube ends are either adiabatic or with heat losses. The simulation is three-dimensional with various wall materials, wall thicknesses and tube lengths. A wide range of Peclet number from 7 to 14,000 is c...

Modelling of building heat transfer needs two basic material characteristics: heat conduction factor and thermal capacity. Under some simplifications these two factors can be determined from a rather simple equipment, generating heat from one of two aluminium plates into the material sample and recording temperature on the contacts between the sample and the plates. However, the numerical evalu...

the present study is concerned with optimal shape determination of inhomogeneous and temperature dependent domains under steady state heat conduction. such situations are important in many thermal design problems, especially in shape design of electronic components and chips. in the present paper, we formulate the shape optimization problem based on volume minimization of heat conductive materi...