Protein separation through hollow fiber flow field-flow fractionation (HF FlFFF) at microflow rate regime was successfully achieved by employing a microbore hollow fiber. In most of the flow field-flow fractionation (FlFFF) techniques applied to the separation of proteins, including hollow fiber FlFFF (HF FlFFF), an outflow rate leading to a detector has typically been a few tenths of a millili...

The compression of 300-fs-long, chirp-free laser pulses at 527 nm down to 30 fs is reported. The laser pulses, originated from a frequency-doubled, mode-locked Nd:glass laser, were compressed by a 0.7-m-long, 150-microm-bore-diameter, argon-filled hollow fiber, and a pair of SF10 prisms with a final energy of 160 microJ. These are the shortest, high energy pulses ever produced by direct pulse c...

A hollow fiber sampling inlet end of capillary electrophoresis (CE) for small ions in complex samples is described. A short piece of hollow fiber, which only permits small ions to pass through its wall, was directly connected to one end of a capillary. Small ions in complex samples were injected into the capillary through the hollow fiber by an electrokinetic method. The experimental results of...

The presently used hollow fiber membrane modules consist of a bundle of fibers in a cylindrical polymer or metal shell parallel to the shell axis. The feed solution flows either through the lumen or at the outside parallel to the fibers. This paper compares the performance of these modules with a new transverse flow module where the hollow fibers are positioned perpendicularly to the flow direc...

In this work composite hollow-fibers were prepared by dip-coating of commercial polypropylene (PP) with a thin layer of ethylene–chlorotrifluoroethylene copolymer (ECTFE). The employment of N-methyl pyrrolidone (NMP) as solvent improved the polymer processability favoring dip-coating at lower temperature (135 ◦C). Scanning electron microscopy (SEM) analyses showed that after dip-coating the PP ...

_____________ _ A new membrane oxygenator has been introduced by Travenol Laboratories with continued development carried out by Sarns Inc. The polypropylene hollow fibers are wound in a pattern perpendicular to the blood flow path and serve as the conduit for the ventilating gas. The membrane surface area is 1.8 M2. The device contains an integral stainless steel bellows heat exchanger and a t...

Optical pulses with 1.1-mJ energy and 5.5-fs duration have been generated at 1-kHz repetition rate from a chirped pulse amplification Ti:Sapphire laser incorporating a differentially pumped hollow-fiber chirped-mirror compressor. The effects of self-focusing and multi-photon ionization during the beam propagation were minimized by differentially pumping the hollow fiber filled with neon. The sp...

A novel approach based on the use of nanometallic-decorated hollow fibers to assist electromembrane extraction is proposed. Microporous polypropylene hollow fibers, on which nanometallic silver was deposited, have been used for the first time as liquid membrane support in electromembrane extraction (EME). Different methods for the generation/deposition of silver nanoparticles (AgNPs) were studi...

Hollow fiber supported ionic liquid membranes (SILMs) were tested using the bubble point method to investigate potential failure modes, including the maximum transmembrane pressure before loss of the ionic liquid from the support. Porous hollow fiber supports were fabricated with different pore morphologies using Matrimid(®) and Torlon(®) as the polymeric material and 1-hexyl-3-methylimidalzoli...