in this study thin layer drying of corn in a convective dryer was investigated at air temperatures of 50, 60 and 70ºc and air flow rates of 1, 1.4 and 1.8 kg min-1. experiments were performed in completely randomized design (crd). the effect of air temperature and flow rate on drying time, drying rate, effective diffusivity coefficient and activation energy were studied. results showed that the...

On farm walnut drying is often a major bottle neck during the start of walnut harvest. The recommended maximum drying air temperature for English walnuts is 110 of. This limit is based on tests by university personnel during the introduction of heated air drying (Batchelor, 1924) which demonstrated that long term exposure to temperatures higher that 110°F caused walnuts to turn rancid. This pro...

This study simulated factors that influence the levels of bacteria on foodservice workers' hands. Relevant data were collected from the scientific literature and from laboratory experiments. Literature information collected included: initial bacterial counts on hands and water faucet spigots, bacterial population changes during hand washing as effected by soap type, sanitizing agent, drying met...

Drying of solid particles is generally divided into three periods: a short initial heating period, a constant drying rate period, and a falling drying rate period. Drying in a fixed under various drying conditions was experimentally studied. The main goals of the measurements were to calculate the heat transfer coefficient based on the measured values, and to evaluate the validity of the consta...

UNLABELLED Alaska pollock (Theragra chalcogramma) is the U.S.A.'s largest commercial fishery, with an annual catch of over 1 million tons. During pollock processing, the skins are discarded or made into fish meal, despite their value for gelatin production. The absence of gelatin-processing facilities in Alaska necessitates drying of the skins before transport to decrease the moisture content, ...

this study determined optimum conditions for drying pomegranate arils in a solar dryer. a cabinet solar dryer was used in active and mixed modes. the response surface method was employed with nine treatments (runs) and a control run (3 m/s air velocity and 2 cm in thickness) and five replications. the bryte cultivar was tested and samples were dried to approximately 10% moisture. drying time, v...

in some conditions, to avoid deterioration and field losses of soybean seeds (glycine max merr.) from weathering at end of the season, farmers start to harvest seeds with a high moisture content and so, careful post-harvest drying would be required to maintain the physiological quality of seeds. response surface methodology (rsm) was used to optimize the operating conditions of soybean seed dry...