Cd, Cr, Mn, Ni, Pb, and Zn behaviour during sewage sludge incineration was investigated in seven pilot tests using a circulating fluidised bed furnace. Dewatered sludge at a solids concentration of 15-18% was fed to the furnace either alone (two tests) or spiked with chlorinated organic compounds (five tests). The behaviour of metals in the fluidised bed furnace was studied by comparing metal c...

Research is made into the fuzzy control of electrode regulator systems of submerged electrical arc ferrosilicon furnace EAF. The equations of the electrode currents and furnace resistances are derived based on certain model for the submerged arc ferrosilicon furnace. This model takes into consideration the walls of furnace and the heat losses into external medium in addition to the heat transfe...

An algorithm has been developed for the non-destructive determination of local thickness of the refractory material walls in smelter furnaces. This method uses measurements of temperature and heat flux at a number of points on the outer (fixed) surface of the furnace and assumes that the inner (guessed) surface of the furnace wall is isothermal. The temperature field is then predicted in the fu...

Absrract This paper presents a practical application of the conventional multi-loop control method for the temperature control of a television glass furnace. To control the temperature of the TV glass furnace, major input-output variables are selected, and simple FirstOrder-Plus-Dead-Time(F0PDT)models are established with the process experimental data. Based on the FOPDT models, a multi-loop. c...

Modern trends in iron metallurgy. Global carbon emissions from iron production. New solution for iron and steelmaking in a way reduce the CO2 emission to the level, where this might be needed in the post Kyoto period. New blast furnace technology, which operate with very low CO2 emissions based on drastically reduced consumption of carbon containing input materials. Injection of reducing gases ...

steel slags are the by products of steel industries, which forms during reduction process of iron melting. the chemical composition of it changes depending to the melting procedure. its mineralogical composition also varies based on the cooling procedure. two different types of steel slag were used as absorbing bed for various concentrations of pb2+ ions in the form of lead chloride, and the co...

background: in the steel industry, coke-fueled furnaces are used for smelting iron ore to produce cast iron are considered as sources of annoying noise.this study aims to evaluate the noise pollution blast furnace and sound source characteristics in order to present noise control measures in the steel industry. methods: measurement of noise level and its frequency analysis was performed using s...

A novel algorithm has been developed for the nondestructive determination of the shape of the interface between a melt and a refractory material wall in smelter furnaces. This method uses measurements of temperature and heat flux at a number of points on the outer surface of the furnace, and assumes that the inner (guessed) surface of the furnace wall is isothermal. The temperature field is the...

Heat treatments are applied to orthodontic wires in order to relieve the stresses arising during orthodontic work. Four types of wires were heated in air, argon or vacuum environments, and cooled in the furnace or in a water bath. The susceptibility to corrosion and mechanical properties of the heat-treated wires were investigated. Heat treatment marginally increased the yield strength and elas...

OBJECTIVES To examine the association between cancer incidence, in particular incidence of lung cancer, and duration of work among employees in eight Norwegian plants producing ferrosilicon and silicon metal. METHODS Among men first employed during 1933-91 and with at least 6 months in these plants, the incident cases of cancer during 1953-91 were obtained from The Cancer Registry of Norway. ...