The AHTR is a pool-type reactor with graphite matrix coated-particle fuel and a clean molten salt coolant [1]. Due to the very high thermal inertia provided by the pool configuration and molten-salt coolant of the AHTR, the thermal power of the AHTR can be substantially higher than an equivalent gas-cooled reactor, likely exceeding 2000 MW(t). The AHTR, with a molten-salt intermediate loop and ...

Data centers are seeking more efficient cooling techniques to reduce their operating expenses, because cooling can account for 30-40% of the power consumption of a data center. Recently, liquid cooling has emerged as a promising alternative to traditional air cooling, because it can help eliminate undesired air recirculation. Another emerging technology is free air cooling, which saves chiller ...

In this article, modeling and optimization of power consumption of two–stage compressed air system has been investigated. To do so, the two – stage compressed air cycle with intercooler of FAJR Petroleum Company was considered. This cycle includes two centrifugal compressors, a shell, and a tube intercooler. For modeling of power consumption, actual compressors isentropic efficiencies and inter...

In this article, modeling and optimization of power consumption of two–stage compressed air system has been investigated. To do so, the two – stage compressed air cycle with intercooler of FAJR Petroleum Company was considered. This cycle includes two centrifugal compressors, a shell, and a tube intercooler. For modeling of power consumption, actual compressors isentropic efficiencies and inter...

This paper presents the exergy analysis of a desalination unit using humidification-dehumidification process. Here, this unit is considered as a thermal system with three main components, which are the heating unit by using a solar collector, the evaporator or the humidifier, and the condenser or the dehumidifier. In these components the exergy is a measure of the quality or grade of energy and...

INTRODUCTION This study compared simulated temperature distributions of intraluminal heating devices, concerning penetration and homogeneity. A hot water balloon, a 434-MHz monopole and a 915-MHz dipole antenna, both with incorporated cooling, and a 27-MHz applicator were investigated. METHODS The hot water balloon had an inlet temperature of 45 degrees C and a flow rate of 7.85 ml s(-1). The...

In this paper a gas turbine power plant including air preheater (recuperator), heat recovery steam generator and air cooler system was modeled. Eight parameters were selected as the design variables.  Fast and elitist non-dominated sorting genetic algorithm (NSGA-II) was applied (to maximize the exergy efficiency and to minimize the total cost rate) for the mentioned cogeneration system. Th...

in this paper, exergy of conditioned air, exergy efficiency, irreversibility, and entropy generation of common models of evaporative cooling have been investigated in five cities of iran. direct evaporative cooling (dec), indirect evaporative cooling (iec), and two-stage iec/dec as the most popular methods of cooling have been modeled. atmospheric conditions are considered as the dead state of ...

Solar air and water heaters are beneficial in many countries across the globe where solar radiation is massive daytime. As surface temperature of photovoltaic cell increases, efficiency scales down. We carried out cooling panels order to maximize their efficiency. In present work, we examined dependence inlet boundary condition on area average at outlet tube. The tube comprises a square cross-s...

In this thesis work, a comprehensive static data center model with raised floor design is developed with improvements based on previous master thesis work. Enhancement work focuses on IT virtualization technology, a general server model, more detailed chiller system and mechanical system, novel modeling methodology for power devices (PDU and UPS). Besides, the temperature of CRAH supply air, CR...