Present study deals with the prediction of crack initiation angle for mixed mode (I/II) fracture using finite element techniques and J-Integral based approach. The FE code ANSYS is used to estimate the stress intensity factor numerically. The estimated values of SIF were incorporated into six different crack initiation angle criteria to predict the crack initiation angle. Single edge crack spec...

Over the past decades, our understanding of nacre's toughening origin has long stayed at the level of crack deflection along the biopolymer interface between aragonite platelets. It has been widely thought that the ceramic aragonite platelets in nacre invariably remain shielded from the propagating crack. Here we report an unexpected experimental observation that the propagating crack, surprisi...

Advances in tetrahedral mesh generation for general, three-dimensional domains with and without cracks are described and validated through extensive studies using a wide range of global geometries and local crack shapes. Automated methods are described for (a) implementing geometrical measures in the vicinity of the crack to identify irregularities and to improve mesh quality and (b) robust nod...

This article presents a study of fatigue-crack propagation behavior in Nitinol, a 50Ni-50Ti (at. pct) superelastic/shape-memory alloy, with particular emphasis on the effect of the stress-induced martensitic transformation on crack-growth resistance. Specifically, fatigue-crack growth was characterized in stable austenite (at 120 8C), superelastic austenite (at 37 8C), and martensite (at 265 8C...

A new experimental method, called the 'hole filling method', is proposed to simulate the healing of internal cracks in rolled workpieces. Based on the experimental results, the evolution in the microstructure, in terms of diffusion, nucleation and recrystallisation were used to analyze the crack healing mechanism. We also validated the phenomenon of segmented healing. Internal crack healing inv...

Ultrasonic methods have been implemented for in situ sizing of fatigue cracks near fastener holes. These techniques, however, only provide an estimate at the time of the measurement and cannot predict the remaining life of the structure. In contrast, statistical crack propagation approaches model the expected fatigue life based on worst-case fatigue process assumptions. The authors have recentl...

Fatigue crack propagation tests under high–low and low–high block loading sequences have been performed in aluminium alloy specimens. The tests were carried out at constant DK conditions. Two stress ratios were analysed: R = 0.05 and R = 0.4. Crack closure was monitored in all tests by the compliance technique using a pin microgauge. The observed transient post load step behaviour is discussed ...

A major part of fracture mechanics is concerned with studying the initiation and propagation of fatigue cracks. This typically requires constant monitoring of crack growth during fatigue cycles and the knowledge of the precise location of the crack tip at any given time. One technique currently available for measuring fatigue crack length is the Potential Drop method[1]. The method, however, ma...

In-phase TMF crack growth testing with different lengths of the hold time at the maximum temperature of 550C has been conducted on Inconel 718 specimens. Focus has been on establishing a method for TMF crack growth testing and investigating the effect of high temperature hold times on the TMF crack growth of the material. The tests are compared to isothermal crack propagation tests and show go...

Recent theoretical results on elastic-plastic planestrain crack growth an~ reviewed and experimental results for crack growth in a 4140 steel are discussed in terms of the theoretical concepts. The theory is based on a recent asymptotic analysis of crack surface opening and strain distributions at a quasistatically advancing crack tip in an ideally plastic solid. The analysis is incomplete in t...