We present ~~°Yb Môssbauer spectroscopy data in the temperature range o.0455o K and magnetic susceptibility and isothermal magnetisation measurements m trie temperature range o.6-50 K in the heavy fermion compound Yb4As3. The presence of +~ 20% of Yb+~ ions is detected in trie Môssbauer spectra with an applied magnetic field of 7 T, yielding a microscopic proof of the existence of a heterogeneo...

Purpose In this experiment you will examine the effect of temperature on retention in isothermal gas chromatography, and use this information to determine the heat of solution of the solute in the stationary phase and to determine the temperature for optimum retention. You will also examine the effect of flow rate on efficiency and construct a van Deemter plot, and determine the flow rate for o...

Non-isothermal stagnation-point flow with consideration of thermal radiation is studied numerically. A set of partial differential equations that governing the fluid flow and energy is converted into a set of ordinary differential equations which is solved by Runge-Kutta method with shooting algorithm. Dimensionless wall temperature gradient and temperature boundary layer thickness for differen...

Dielectric and mechanical spectroscopy methods have been employed to describe the temperature dependencies of the segmental and macromolecular relaxation rates in epoxy/hydroxy functionalized polybutadiene. Dielectric studies on the dynamics of segments of the polymer as well as the mobility of small ions trapped in the system have been carried out both as a function of temperature and pressure...

This paper gives similarity transformations for laminar film condensation on a vertical flat plate with variable temperature distribution and finds analytical solutions for arbitrary Prandtl numbers and condensation rates. The work contrasts with Sparrow and Gregg’s assertion that wall temperature variation does not permit similarity solutions. To resolve the long debatable issue regarding heat...

Melting and crystallization of poly(vinylidene fluoride) (PVDF) blended with polyamide 6 (PA6) has been studied by differential scanning calorimetry. The melting of PVDF and PA6 is observed over a small temperature range, i.e. 174 to 181°C and 220 to 230°C, respectively, over the whole blend composition. This observation indicates that PVDF and PA6 are immiscible and do not co-crystallize, alth...

An algorithm has been developed for the non-destructive determination of local thickness of the refractory material walls in smelter furnaces. This method uses measurements of temperature and heat flux at a number of points on the outer (fixed) surface of the furnace and assumes that the inner (guessed) surface of the furnace wall is isothermal. The temperature field is then predicted in the fu...

This paper presents a significant method and a basic idea of waste heat recovery from high temperature slags based on Time Temperature Transformation (TTT) curves. Three samples with a fixed CaO/SiO2 ratio of 1.05 and different levels of Al2O3 were designed and isothermal experiments were performed using a Single Hot Thermocouple Technique (SHTT). The TTT curves established through SHTT experim...

The main kinetic aspects of the chlorination of tungsten minerals with chlorine and sulphur dioxide were analyzed from data obtained under non-isothermal conditions. The tungsten minerals studied were wolframite, scheelite and a scheelite-wolframite concentrate. The collected minerals were milled and then concentrated by means of gravity separation. Chlorinations were made in a vertical reactor...

--This study attempts to understand the effect of different UV irradiation methods on the intercalation of LDPE/MMT nanocomposites, and its molecular behavior at certain isothermal crystallization temperature. Three different methods of UV exposure were employed using single composition of LDPE/MMT nanocomposites. All samples were annealed for 5 hours at a crystallization temperature of 100oC. ...