We describe a simple method of determining weight loss and hence water loss of infants in incubators. Unlike previously reported methods, it does not interfere with the microenvironment surrounding the infant. Weight loss of 16 term and 32 preterm infants was measured in both forced and natural convection. No significant increase in water loss was observed in the term infants but in the preterm...

In this work transient mixed convection in a porous medium in a horizontal channel with a open cavity below is studied numerically. The cavity presents a heated wall at uniform heat flux and the other walls of the cavity and the channel are assumed adiabatic. Air flows through the horizontal channel. The heated wall of the cavity experiences a uniform heat flux in such a way that the forced flo...

Laminar natural convection in differentially heated (β = 0°, where β is the inclination angle), inclined (β = 30° and 60°), and bottom-heated (β = 90°) square enclosures filled with a nanofluid is investigated, using a two-phase lattice Boltzmann simulation approach. The effects of the inclination angle on Nu number and convection heat transfer coefficient are studied. The effects of thermophor...

a numerical investigation of laminar mixed convection heat transfer in a shallow two-sided lid driven rectangular enclosure of aspect ratio 5, (ar=5) is executed. the natural convection effect is sustained by subjecting the bottom wall to a higher temperature than its top counterpart. in addition, the two horizontal walls of the enclosure are moving in different directions and the two vertical ...

Developing next generation transient heat exchangers is a transformative technology for efficient ther-mal management of advanced power electronics and electric machines (APEEM) inside hybrid electric,electric, and fuel cell vehicles as well as renewable energies (wind, solar, tidal). Optimal design criteriafor such dynamic heat exchangers should be achieved through addressing inter...

A comprehensive review of published works dealing with numerical modelling forced convection heat transfer and hydrodynamics nanofluids is presented. Due to the extensive literature, limited straight, smooth, circular tubes, as this basic geometry in shell-and-tube exchangers. Works on tubes are presented chronologically first part article. Particular attention was paid method solution governin...

The falling and settling of solid particles in gases and liquids is a natural phenomenon happens in many industrial processes. This phenomenon has altered pure forced convection to a combination of heat conduction and heat convection in a flow over a plate. In this paper, the coupling of conduction (inside the plate) and forced convection of a non-homogeneous nanofluid flow (over a flat plate) ...

In this paper, forced and free convection in the cavity is simulated numerically with complex boundary conditions. Temperature changes sinusoidally at the upper and right walls and the temperature of the other walls is kept at zero. The effects of Prandtl and Grashof numbers variations on flow patterns are surveyed. A wide range of materials, e.g. molten metals, gases, water, and coolant liquid...

The explosive viscous liquid becomes inject to warhead by discharge system. The injection device is consisted of a piston to move down and leads the viscous fluid through the cylindrical pipe towards the end of the duct. Then the viscous fluid leads into a convergent path that will be injected to the warhead or other injection equipment. In this project, the path of viscous fluid flow is divide...

This paper describes one-dimensional (parallel) laminar and transitional regimes of natural convection in a viscous stably stratified fluid due to temporally-periodic variations in the surface temperature of infinite vertical plates and cylinders. Analytical solutions are obtained for the periodic laminar regime for arbitrary values of stratification, Prandtl number and forcing frequency. The s...