Integration of phase change materials (PCMs) into building fabrics is considered to be one of the potential and effective ways of minimizing energy consumption and CO2 emissions in the building sector. In order to assess the thermal effectiveness of this concept, composite PCM drywall samples (i.e. randomly-mixed and laminated PCM drywalls) have been evaluated in a model passive solar building....

Laminated magnetoelectric composites of Li0.058(Na0.535K0.48)0.942NbO3 (LKNN)/Co0.6Zn0.4Fe1.7Mn0.3O4 (CZFM) prepared by the conventional solid-state sintering method were investigated for their dielectric, magnetic, and magnetoelectric properties. The microstructure of the laminated composites indicates that the LKNN phase and CZFM phase can coexist in the composites. Compared with the particul...

Laminated composite plates are widely used in modern structures. Resins of composites are almost made of polymers which show time dependent and and in some cases stress dependent behaviour. In this paper, a laminated composite plate is analysed using a multiscale method. At first, material properties of a lamina is obtained using an analytical micromechanical approach called simplified unit cel...

Despite the long history of the use of laminated glass in buildings there is concern with some architects on the potential for serious delamination issues with laminated glass. This paper provides test data on the edge stability of laminated glass and details various types of delamination problems, which can arise if proper glass processing and installation practices are not followed. Guidance ...

As focus is drawn toward more sustainable construction practices, use of bamboo as a structural building material is growing as a topic of interest. It is highly renewable, has low-embodied energy, and has the highest strength-to-weight ratio of steel, concrete, and timber. Composite lumber made from bamboo, termed laminated bamboo lumber (LBL), has gained the particular interest of researchers...

Most of the quadrupole magnets in the KEK B-factory are accompanied by a set of vertical and horizontal dipole corrector magnets in both the LER and HER rings[1]. The typical separation between a quadrupole and a dipole corrector magnet is 202 mm, as measured from the laminated ends. This corresponds to ~3.7 (2.4) times of the bore radius of a quadrupole magnet in the arc (straight) sections. S...

this research investigates the effect of the post-cure time on the residual stresses in laminated composites. laminated composites were made of t300 carbon fibers and epoxy resin. the post-cure process was carried out at the constant temperature of 120 °c for 6 and 12 hours for two specimens. the slitting method was employed to determine through-thickness residual stress distribution of the com...

The generalized plane strain quasi-static thermoelastic deformations of laminated anisotropic thick plates are analyzed by using the Eshelby±Stroh formalism. The laminated plate consists of homogeneous laminae of arbitrary thicknesses. The three-dimensional equations of linear anisotropic thermoelasticity simpli®ed to the case of generalized plane strain deformations are exactly satis®ed at eve...

K465 superalloy with high titanium and aluminum contents was easy to crack during laser metal deposition. In this study, the crack-free sample of K465/Stellite-6 laminated material was formed by laser metal deposition shaping to control the cracking behaviour in laser metal deposition of K465 superalloy. The microstructure differences between the K465 superalloy with cracking and the laminated ...

Aluminum lamination was performed to improve the physical and mechanical properties of several wood-based composite panels. The panels were aluminum-laminated on two faces in a hot press at 689 kPa and 120 °C for 6 min. Four types of wood-based composites were used as cores, and aluminum 3003 alloy sheets were used for face laminations. Polyurethane adhesive ensured bonding strength between the...