The ring laser gyro (RLG) dither axis will bend and exhibit errors due to the specific forces acting on the instrument, which are known as g-sensitive misalignments of the gyros. The g-sensitive misalignments of the RLG triad will cause severe attitude error in vibration or maneuver environments where large-amplitude specific forces and angular rates coexist. However, g-sensitive misalignments ...

We report a demonstration of phase-resolved vibrometry, in which out-of-plane sinusoidal motion is assessed by heterodyne holography. In heterodyne holography, the beam in the reference channel is an optical local oscillator (LO). It is frequency-shifted with respect to the illumination beam to enable frequency conversion within the sensor bandwidth. The proposed scheme introduces a strobe LO, ...

Observation techniques for measuring the vibration of a single microcapsule with a hard plastic shell in an acoustic standing wave field are discussed. First, optical observation of a microcapsule vibration by using a laser Doppler vibrometer (LDV), which can observe small capsule vibration amplitudes at high-frequency, was investigated. Capsules of tens of micrometer size were trapped at the a...

The present study has established equal sensation curves for steering wheel hand-arm rotational vibration. Psychophysical response tests of 20 participants were performed in a steering wheel rotational vibration simulator using the category-ratio Borg CR10 scale procedure for direct estimation of perceived vibration intensity. The test stimuli used were sinusoidal vibrations at 22 third octave ...

Experiments were conducted to determine the effects of frequency and amplitude of vibration on friction. The experimental analysis also seeks to take into account a variety of factors influencing the coefficient of friction such as normal load and surface roughness. An in-house pin-on-disc apparatus was constructed with a spindle speed control and applied forced-feedback to perform the tests. T...

The severe vibration of a screw compressor outlet piping system caused the fatigue failure of some thermowells and the unscheduled shut down of the system. The main reasons of the abnormal vibration in the outlet piping system were investigated by developing an acoustic model to simulate the gas pulsation and establishing two finite element models to conduct the mechanical vibration analyses. T...

This study was conducted to clarify the effects of vibration on the peripheral nerves. Rat tails were exposed to vibration (acceleration 56.9 m/s2, frequency 60 Hz, amplitude 0.4 mm for two or four hours daily, six days a week. The maximum motor conduction velocity (MCV), the amplitude of evoked response, and the motor distal latency were measured on rat tail nerves every two months. Thin secti...

Objective: To evaluate the effects of tooth displacement and vibration on frictional force and stickslip phenomenon (SSP) when conventional brackets were used with a levelling/alignment wire. Materials and Methods: The samples consisted of six groups (n = 10 per group) with combinations of tooth displacement (2 mm lingual displacement [LD], 2 mm gingival displacement [GD], and no displacement [...

OBJECTIVE The aim of this study was to evaluate the effects of different whole-body vibration (WBV) training amplitudes on left ventricular stroke volume and ejection fraction in healthy young men. METHODS A total of 24 healthy men (age 21.71±1.49 year, height 176.17±6.61 cm, weight 70.73±10.08 kg, BMI 22.36±3.57 kg/m2, and body surface area 1.87±0.13 m2) were divided into two groups: high an...