The dependence of electron overflow on peak emission wavelength was investigated in single-quantum-well (SQW) light-emitting diodes (LEDs) grown on the (20 21), (20 2 1), (10 10), and (0001) planes. Each plane exhibited a characteristic ‘‘critical’’ emission wavelength where the output power of LEDs (measured at a current density of 22 A/cm) without electron blocking layers (EBLs) decreased sig...

The purpose of this study was to evaluate the microhardness of resin-based materials polymerized with a LED (light-emitting diode) light-curing unit (LCU) and a halogen LCU. Twenty cylindrical specimens (3.0 mm in diameter and 2.0 mm high) were prepared for each tested material (Z100, Definite and Dyract). Specimens were light-cured with two LCUs (Ultraled and Curing Light 2500) for either 40 o...

Light-emitting diodes (LEDs) play an important role as a formidable contender for next-generation lighting sources and rapidly replace conventional lighting sources. In this report, the growth of high density inclined ZnO nanorods (NRs) on the N-face n-GaN surface for high efficiency vertical light-emitting diodes (VLEDs) is demonstrated based on oxygen plasma pretreatment and hydrothermal grow...

We describe a compact microscope that uses a spatial light modulator (SLM) to control the excitation laser light. The flexibility of SLMs, which can mimic virtually any optical transfer function, enables the experimenter to create, in software, arbitrary spatio-temporal light patterns, including focusing and beam scanning, simply by calculating the appropriate phase mask. Our prototype, a scan-...

The charge behavior of organic light emitting diode (OLED) is investigated by steady-state current-voltage technique and impedance spectroscopy at various temperatures to obtain activation energies of charge injection and transport processes. Good agreement of activation energies obtained by steady-state and frequency-domain was used to analyze their contributions to the charge injection and tr...

Multicolor single InGaN/GaN dot-in-nanowire light emitting diodes (LEDs) were fabricated on the same substrate using selective area epitaxy. It is observed that the structural and optical properties of InGaN/GaN quantum dots depend critically on nanowire diameters. Photoluminescence emission of single InGaN/GaN dot-in-nanowire structures exhibits a consistent blueshift with increasing nanowire ...

UNLABELLED While utilizing removable dentures, regardless of whether the dentures are acrylic or fabricated of eclipse resin, the need for their filling-relining or their repair frequently arises. The purpose of this study is to display the technicalities of the procedure for rebasing and relining of removable light curing eclipse denture resin. MATERIAL AND METHODS This study presents cases ...

Aim. Physicochemical mechanical and in vitro biological properties of novel formulations of polymeric calcium phosphate cements (CPCs) were investigated. Methods. Monocalcium phosphate, calcium oxide, and synthetic hydroxyapatite were combined with either modified polyacrylic acid, light activated polyalkenoic acid, or polymethyl vinyl ether maleic acid to obtain Types I, II, and III CPCs. Sett...

introduction: discoloration of resin composites is a common reason for replacement of these restorations. the aim of this study was to eva-luate the influence of different light curing de-vices on color stability of a microhybrid resin composite. materials and methods: 80 disc-shaped speci-mens (8 mm in diameter, 2-mm height) were fabricated from filtek z250 resin composite. specimens were divid...

Objective: The present study aims to evaluate the color stability and degree of conversion amine-free dual cured resin cement compared light amine-containing cements used with two different translucencies thin esthetic restorations. Material Methods: A total 120 specimens were prepared for testing (n=60). divided into three main groups according type. Group 1: cured, 2: 3: cured. Each group was...