Both the load partitioning between hydroxyapatite (HAP) and collagen during compressive creep deformation of bone and the HAP residual strain in unloaded bone have been shown in previous synchrotron X-ray diffraction studies to be affected by the X-ray irradiation dose. Here, through detailed analysis of the X-ray diffraction patterns of bovine bone, the effect of X-ray dose on (i) the rate of ...

A silicon load cell (force sensor) is presented which is based on a new operating principle. The force is measured by compressing a meander like strain gage. A second strain gage which is not loaded, is used for temperature compensation and for compensation of bending and stretching stresses in the chip. Also, same changes in zero load resistor values are eliminated. It is shown that the output...

The uniaxial compression-creep behavior of unidirectionally reinforced continuous-fiber composite materials was investigated for the case where both the matrix and the fiber underwent plastic deformation by creep. The creep behavior of NiAl composites reinforced with 5 to 20 vol pct tungsten fibers was characterized at 1025 8C. The NiAl-W composites exhibited a three-stage creep behavior, with ...

Diffusion-controlled-creep processes are used to assess the creep behavior of dispersion and solute hardened materials at coarse and fine grain sizes. It is shown that the creep behavior of a dispersion strengthened (DS) Al–Mg alloy is similar to the creep behavior of pure Al–Mg alloys. Both materials show dislocation climb and dislocation solute-drag contributions to creep. It is shown that th...

Bi2O3 is an excellent ceramic candidate for transformation-mismatch plasticity because of its low melting point, its allotropic nature and the rapid creep rate of its high-temperature d-phase. Transformation-mismatch plasticity, which has been reported in many polymorphic metals, alloys and composites [1], is a deformation mechanism taking place during a phase transformation: internal mismatch ...

Previously, numerous creep studies on wood materials have been conducted in various coupon-scale tests. None had research properties of full-scale wooden cross-arms under actual environment and working load conditions. Hence, this established findings effect braced arms the behaviors Virgin Balau (Shorea dipterocarpaceae) timber cross-arm 132 kV latticed tower. In research, main members both cu...

Gamma titanium aluminides (γ-TiAl) display significantly improved high temperature mechanical properties over conventional titanium alloys. Due to their low densities, these alloys are increasingly becoming strong candidates to replace nickel-base superalloys in future gas turbine aeroengine components. To determine the safe operating life of such components, a good understanding of their creep...

A simple model is presented for the description of relaxation, creep, and strain stiffening phenomena that are observed in parallel-fibered collagenous tissues such as ligaments and tendons. In the model formulation, the tissues are assumed to be composed of collagen fibers aligned along their physiological loading direction. The collagen fibers are gradually recruited under strain and are arra...

The tensile creep and creep-recovery behaviour of a unidirectional SiC fibre-Si3N4 matrix composite was analysed using finite element techniques. The analysis, based on the elastic and creep properties of each constituent, considered the influence of fibre-matrix bonding and processing-related residual stresses on creep and creep-recovery behaviour. Both twoand threedimensional finite element m...