Crystallographic reconstruction of parent austenite grain boundaries from the martensitic microstructure in a wear resistant steel was carried out using electron backscattered diffraction (EBSD). The present study mainly aims to investigate the parent austenite grains from the martensitic structure in an as-rolled (reference) steel sample and samples obtained by quenching at different cooling r...

High nitrogen martensitic stainless steel 30Cr15Mo1N plates were successfully welded by friction stir welding (FSW) at a tool rotation speed of 300 rpm with a welding speed of 100 mm/min, using W-Re tool. The sound joint with no significant nitrogen loss was successfully produced. Microstructure, mechanical and corrosion properties of an FSW joint were investigated. The results suggest that the...

The electric resistance, sensitively dependent on the electronic structure and currently used to detect transformation temperatures in shape memory alloys, deserves attention also in the stress transformation domain. In fact, the electric resistance has already been investigated under increasing stress in the martensitic phase of several shape memory alloys: in this case a linear relationship i...

The microstructure and martensitic transformation in the Ni-36.3Al-0.1Y (in at.%) alloy were investigated after ho~nogenisation and plastic deformation by hot upsetting at 1100°C. The alloy exhibited large, recrystallised grains of the Ni-A1 P phase wit11 spl~erical precipitates inside the grains and a thin layer of other phases located at the grain boundaries. The SEM and EDX analysis showed t...

In this research, the effect of annealing and aging temperature as well as the effect of quenching media on the microstructure, hardness and dry sliding wear behavior of Ti-6Al-4V alloy has been studied. Cylindrical samples with the diameter of 10 mm and the height of 20mm were solutionized at 930˚C and 1060˚C for 600 seconds and then were quenched in the cold water and in the air. The samples ...

this paper focused on the characterization of electrochemical behavior of a martensitic stainless steel inthe acidic solutions. for this purpose, electrochemical parameters were derived from potentiodynamicpolarization, mott schottky analysis and electrochemical impedance spectroscopy (eis) techniques.the potentiodynamic polarization results showed that corrosion current density of aisi 420 sta...