in the present work, the aa2124/25vol.%mosi2 composite was produced by powder metallurgy technique. the aluminum alloy 2124 powder was produced by gas atomization method and the mosi2 intermetallic particles were produced through combustion synthesis. the aa2124 matrix powder was mechanically blended with 25vol.%mosi2 using a ball milling mixer. the blended powder mixture was encapsulated and t...

Production of aluminum matrix composites is widespread because these material provide enhanced mechanical properties compared to aluminum. One the most important parameters of metal matrix composite production is uniform distribution of reinforcing nanoparticles in matrices using the stir-casting method. Second is ensuring high wettability, which is determined by evaluating the properties of ma...

In this study, the elemental powders of aluminum and copper were initially subjected to mechanical alloying using an attrition ball mill under argon atmosphere to produce an Al-4.5 wt% Cu powder alloy. The WC nanoparticles were then added to the powder alloy and milled in a planetary ball mill to explore the role of the WC nanoparticles on the mechanical properties of the fabricated composite p...

We conduct a finite element analysis of the slice compression test [13] applied to metal-matrix composites. This test, designed to characterize interfaces in composite materials, involves pressing a composite material specimen on a soft plate so that fibers are forced to protrude and intrude into the soft plate leaving a permanent deformation. We focus on the Ti-6Al-4V matrix with SCS-6 silicon...

This paper describes investigations into Direction–Of– Arrival (DOA) estimation of a wideband signal by a two– dimensional array antenna, which employs only spatial signal processing for beam forming. The elements of this array are arranged in a horizontal rectangular lattice to steer a beam in azimuth over a wide frequency band. By applying the concept of interpolated array, a composite covari...

An original approach to compute the longitudinal tensile break stress of multiphase composite materials with short fibers reinforcement is presented. The most obvious mechanical model which reflects a multiphase composite material is a pre-impregnated material, known as prepreg. We may include in this class of prepregs, Sheet-and Bulk Moulding Compounds. The model is seen as consisting of three...

In this research, using pyrolysis of phenolic resin in the presence of silicon particles, the SiC ceramic composite is formed. The samples were prepared by introducing 30, 35, 40, 45 and 50 wt% of Si particles to the phenolic resin. The samples were cured at 180°C then carbonized at 1100°C. The final carbonized C/Si composites are hot-pressed at 1500°C in inert atmosphere, which is more than th...

There are many objects for which the attenuation varies significantly as they are rotated during computerized X-ray tomography, for example plate samples. This can lead to significant ring artefacts in the subsequent tomographic reconstructions. In this paper a new method is presented that can successfully suppress such ring artefacts and is applicable to both parallel and cone-beam geometries....

In situ Al2024- Mg2Si composite was fabricated by spark plasma sintering (SPS) of reactive powder. Reactive powder was obtained from mechanical alloying (MA) of elemental powders. Clad layers of in situ composite were fabricated on Al substrates by spark plasma sintering (SPS). Structural evolution during MA process and after SPS was investigated by X-ray diffractometery (XRD). Scanning electro...