By: Resnik, Jack

Article history: Received 25 May 2015 Received in revised form 27 June 2015 Accepted 2 July 2015 Available online xxxx

By: Resnik, Jack

The effects of dissolved air in the dielectric liquid FC-77 on flow boiling in a microchan-nel heat sink containing ten parallel channels, each 500 ␮m wide and 2.5 mm deep, were experimentally investigated. Experiments were conducted before and after degas-sing, at three flow rates in the range of 30– 50 ml/ min. The dissolved air resulted in a significant reduction in wall temperature at which...

A laboratory-scale temperature system for Control and Automation courses is presented. The system is a coupled two-input two-output process which use peltier modules for temperature control. This paper describes the laboratory-scale system in details. A linear dynamic model of the thermoelectric cooler including the heat sink and the cooling-load heat exchanger is developed and experiments are ...

The design and reliable operation of a two-phase micro-channel heat sink require a fundamental understanding of the complex transport phenomena associated with convective boiling in small, parallel coolant passages. This understanding is the primary goal of this paper. This goal is realized by exploring the following aspects of boiling in microchannels: hydrodynamic instability, two-phase flow ...

In the present paper, an experimental assessment was performed on the transient thermal performance of a heat sink filled by a phase change material (PCM) and PCM embedded with carbon nanofibers (CNFs) and titania (TiO2) nanoparticles as nanostructured materials. In order to enhance the thermal conductivity of PCM, CNFs and TiO2 nanoparticles at different loadings (0.5wt. % and 2 wt.% of CNFs a...

In this study, the enhancement of the heat release performance of an extruded-type heat sink to prepare the large-capacity solar inverter thru the flow holes in the base plate near the heat sources was investigated. Optimal location and number of the holes in the baseplate were determined by using a commercial computation program. The heat release performance of the shape-modified heat sink was...

In this experiment, we investigated the performance of two types of heat sink, swagedand extruded-type, used in the inverter of industrial electricity generator. The swaged-type heat sink has 62 fins, and the extruded-type has 38 fins having the same dimension as that of the swaged-type. But the extruded-type heat sink maintains the same heat transfer area by the laterally waved surface which h...