the role of polymeric additives such as pvp and peg is studied with respect to the morphology of pes porous layer as a sublayer of nanofiltration composite membranes based on pes/pa. results show that by phase inversionprocess of quaternary systems comprised of four components of polymer/solvent/non-solvent/additive and the diffusion of intertwined polymers some changes occur in membrane morpho...

We report on the thermally induced changes of the nano-structural and optical properties of hydrogenated nanocrystalline silicon in the temperature range 200-700 degrees C. The as-deposited sample has a high crystalline volume fraction of 53% with an average crystallite size of ~3.9 nm, where 66% of the total hydrogen is bonded as identical withSi-H monohydrides on the nano-crystallite surface....

A novel approach to grow a 3D COF-320 membrane on a surface-modified porous α-Al2O3 substrate is developed. A compact and uniform COF-320 membrane with a layer thickness of ∼4 μm is obtained. This is the first reported 3D COF functional membrane fabricated successfully on a common porous α-Al2O3 ceramic support. The gas permeation results indicate that the gas transport behavior is mainly gover...

We present a method for direct three-dimensional (3D) patterning of porous nanomaterials through the application of a premastered and reusable gray-scale stamp. Four classes of 3D nanostructures are demonstrated for the first time in porous media: gradient profiles, digital patterns, curves and lens shapes, and sharp features including v-grooves, nano-pits, and 'cookie-cutter' particles. Furthe...

Poly (amide-6-b-ethylene oxide)/Zinc Oxide (PEBA/ZnO) mixed matrix membranes were fabricated using ethanol/water as solvent by solvent casting method. The concentration of ZnO in membrane was set to 0.1 wt.% and the synthesized membranes were characterized by AFM and FTIR. Effects of ZnO nanoparticle on CO2, CH4 and N2 permeabilities, and CO2/N2<...

mirage effect is contactless and non destructive method which has been used a lot to determine thermal properties of different  kind of samples , transverse photothermal deflection ptd in  skimming configuration with ccd camera  and special programs is used to determine thermal conductivity of porous silicon ps  film. ps samples were prepared by electrochemical etching. thermal conductivity wit...

This paper presents the results of mechanical strength of wet and dry zirconia/ Nafion® nano-composite membrane. The tensile tests were conducted to determine elastic modulus and stiffness of dry and wet pristine Nafion® membrane and modified Nafion® membrane. The composite membranes were prepared by recast method of different synthesized zirconium oxide with the zirconia content of 10% by weig...

Poly (amide-6-b-ethylene oxide)/Zinc Oxide (PEBA/ZnO) mixed matrix membranes were fabricated using ethanol/water as solvent by solvent casting method. The concentration of ZnO in membrane was set to 0.1 wt.% and the synthesized membranes were characterized by AFM and FTIR. Effects of ZnO nanoparticle on CO2, CH4 and N2 permeabilities, and CO2/N2<...