Laboratory experiments and field trials have shown that oil recovery from carbonate reservoirs can be increased by modifying the brine composition injected during recovery in a process termed controlled salinity water-flooding (CSW). However, CSW remains poorly understood and there is no method to predict the optimum CSW composition. This work demonstrates for the first time that improved oil r...

Although lots of experiments have been done in enhanced oil recovery, the number of experiments which consider the effects of local and global heterogeneity on efficiency of enhanced oil recovery based on the polymer-surfactant flooding is low and rarely done. In this research, we have done numerous experiments of water flooding and polymer-surfactant flooding on a five spot glass micromodel in...

In laboratory sandpack tests for heavy oil recovery by alkaline flooding, it was found that wettability alteration of the sand had a significant impact on oil recovery. In this work, a heavy oil of 14 API was used to examine the effect of organic acids in the oil and water chemistry on wettability alteration. From interfacial tension measurements and sand surface composition analysis, it was c...

A bacterial strain (designated as Alcaligenes sp. MS-103) isolated from oil sample of the Aghajari oilfield in the south of Iran, was able to produce an effective extracellular lipopolysaccharide biosurfactant (1.2±0.05 g/l) on molasses as a sole carbon source. The highest surface tension reduction to level 20 mN/m was achieved by biosurfactant produced by cells grown on molasses under optimum ...

In this research the experimental and theoretical studies on different Enhanced Oil Recovery (EOR) techniques, i.e. Water Flooding (WF), Gas Injection (GI) and Water Alternating Gas process (WAG) were performed on specimens taken from an Iranian carbonate offshore reservoir at the reservoir condition. The experimental results for each specified techniques were compared with the correspondin...

In oil production it is crucial to find out properties of the ground from various measurements of geophysical fields. In secondary oil recovery oil is extracted by pumping in water (through injecting wells) and creating pressure which pumps out oil through production wells. Water/oil pressure at wells is monitored providing with an information to determine two important characterictics of mediu...

Electrospun non-woven poly(ε-caprolactone) (PCL) microfiber meshes are described as biodegradable, mechanically robust, and reusable polymeric oil sorbents capable of selectively retrieving oil from simulated oil spills in both fresh and seawater scenarios. Hydrophobic PCL meshes have >99.5% (oil over water) oil selectivity and oil absorption capacities of ~10 grams of oil per gram of sorbent m...

obtaining samples that represent original fluid of reservoirs optimizes reservoirs management. the optimized management increases recovery. also, selecting and performing proper improved oil recovery (ior) or enhance oil recovery (eor) programs depend on collecting representative samples. achieving accurate compositions of original in-situ fluid prevents overdesigning surface facilities. repres...

The Deepwater Horizon oil spill affected hundreds of kilometers of coastal wetland shorelines, including salt marshes with persistent heavy oiling that required intensive shoreline "cleanup" treatment. Oiled marsh treatment involves a delicate balance among: removing oil, speeding the degradation of remaining oil, protecting wildlife, fostering habitat recovery, and not causing further ecologic...